PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEFT TURBOCHARGER COMPRESSOR OUTLET BELLOWS ON CERTAIN 3512C HD LOCOMOTIVE ENGINES
Usage:
TEBE2053-00
Show/hide table
| 25Sep2014 |
T010
Y89B
Y89B
Show/hide table
| Before/After (Limited distribution) | PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEFT TURBOCHARGER COMPRESSOR OUTLET BELLOWS ON CERTAIN 3512C HD LOCOMOTIVE ENGINES |
|
| 1071 1059 | PS44492 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44492" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2016 |
PROBLEM
Show/hide table
| The existing Bellows can fail on certain 3512C HD Locomotive Engines. If the existing bellows fails it can/will result in a boost leak and power loss. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512C HD | F2X00262-00265, 268-271, 274-275, 280-283, 285-287 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3026504 | BELLOWS AS |
| 2 | 4346544 | CLAMP-V-BAND |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Every 500 part hours replace the left side Turbocharger Compressor Outlet Bellow 302-6504. Note: Ensure the new bellow is aligned properly with the inlet tube and turbocharger compressor outlet so there is not a bend in the bellow. Tighten the new 434-6544 V Band Clamps to 12 +/- 1 N.m (106 +/- 9 lb in). |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-60 mo |
||||||
Show/hide table
| NOTE: This is a 0.5-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER CORE ON CERTAIN 3512C HD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER CORE ON CERTAIN 3512C HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN 3512C, 3512C HD, 3516C, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN 3512C, 3512C HD, 3516C, AND 3516C HD MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THE PROPER TORQUE TO THE FRONT DAMPER PULLEY BOLTS ON CERTAIN 725C ARTICULATED TRUCKS, 966M WHEEL LOADERS, C9 PETROLEUM ENGINES, AND C9.3 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THE PROPER TORQUE TO THE FRONT DAMPER PULLEY BOLTS ON CERTAIN 725C ARTICULATED TRUCKS, 966M WHEEL LOADERS, C9 PETROLEUM ENGINES, AND C9.3 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONTROL PANEL CIRCUIT BOARD ON CERTAIN C2.2 RENTAL GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONTROL PANEL CIRCUIT BOARD ON CERTAIN C2.2 RENTAL GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN AIR COMPRESSORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN AIR COMPRESSORS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LEVEL GAUGE ON CERTAIN C15, C18, C27, AND C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LEVEL GAUGE ON CERTAIN C15, C18, C27, AND C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER ON CERTAIN 3508C, 3512C, AND 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER ON CERTAIN 3508C, 3512C, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER ON CERTAIN 3512C AND 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER ON CERTAIN 3512C AND 3516C MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3512C AND 3516C MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3512C AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DPF DIFFERENTIAL PRESSURE LINES ON CERTAIN C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE DPF DIFFERENTIAL PRESSURE LINES ON CERTAIN C13 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOTORIZED LOUVERS ON CERTAIN C27 AND C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOTORIZED LOUVERS ON CERTAIN C27 AND C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DPF DIFFERENTIAL PRESSURE LINES ON CERTAIN C9.3 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE DPF DIFFERENTIAL PRESSURE LINES ON CERTAIN C9.3 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 439-2178 FUEL PRESSURE INDICATORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 439-2178 FUEL PRESSURE INDICATORS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE MONITORING SYSTEM (EMS) III MODULE ON CERTAIN 3512C PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE MONITORING SYSTEM (EMS) III MODULE ON CERTAIN 3512C PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THE PROPER TORQUE TO THE RADIATOR MOUNTING BOLTS ON CERTAIN C9, C11, C13, C15, AND C18 INDUSTRIAL ENGINES IN A GENERATOR SET APPLICATION PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THE PROPER TORQUE TO THE RADIATOR MOUNTING BOLTS ON CERTAIN C9, C11, C13, C15, AND C18 INDUSTRIAL ENGINES IN A GENERATOR SET APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER HEATER ON CERTAIN 3512B PETROLEUM LAND DRILLING GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER HEATER ON CERTAIN 3512B PETROLEUM LAND DRILLING GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD BRACKET FASTENING HARDWARE ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD BRACKET FASTENING HARDWARE ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PACKS ON CERTAIN 3512B LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PACKS ON CERTAIN 3512B LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER DUE TO LIP SEAL LEAKS ON CERTAIN C-SERIES TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER DUE TO LIP SEAL LEAKS ON CERTAIN C-SERIES TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE PRELUBE LINE ON 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE PRELUBE LINE ON 3516C HD MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS