PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN 3512C, 3512C HD, 3516C, AND 3516C HD MARINE ENGINES Caterpillar

PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN 3512C, 3512C HD, 3516C, AND 3516C HD MARINE ENGINES

Usage:

TEBE1996-00

Show/hide table

12Dec2014

U-761

A-559

D-666

O-659

TM-28

Show/hide table

Before/After	PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN 3512C, 3512C HD, 3516C, AND 3516C HD MARINE ENGINES
1451		PS44605

Show/hide table

NOTE:

Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.

NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44605" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Show/hide table

TERMINATION DATE

31Dec2016

PROBLEM

Show/hide table

The existing solenoid can fail due to contamination and or debris from the air supply on certain 3512C, 3512C HD, 3516C, and 3516C HD Marine Engines. If the existing solenoid fails the engine can have intermittant starting issues.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
3512C	E3W00361-00366 E3Y00405 SLM00609, 633-634
3512C HD	T3P00200-00211, 214-251, 253-275, 277-280 T3R00203-00218, 223-226, 235-250, 253-290 T3S00202-00207, 210-214 T3W00204-00209, 215-217, 220, 223-226, 241-244 TKP00200-00210, 212, 214-217, 219-226, 228-229, 231
3516C	JTS00415, 417-419, 421-422, 478, 486-489, 505 TTD00420, 422
3516C HD	TKR00200-00201, 204-209 TKS00206-00207, 214-233 TKT00200-00243 TKX00200 TKY00200-00209, 211-248, 250-269, 271-273, 275-279, 281-291, 293-294, 296-300, 302-308, 310, 312-316, 318-322, 325-332, 334, 336-337, 339-342, 344-346, 348-351, 353 TTY00102-00103

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
1	1465215	SCREEN GP
1	4658142	KIT-SERVICE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

A service kit and an additional 300# mesh strainer is available as additional protection against dirty air supply. Refer to the attached Rework Procedure.

Show/hide table

SERVICE CLAIM ALLOWANCES

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
0-18000 hrs, 0-48 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%

Show/hide table

NOTE: This is a 1.0-hour job

Show/hide table

PARTS DISPOSITION

Show/hide table

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Rework Procedure

Show/hide table

The new solenoid (465-8142, KIT-SERVICE) is a bolt-on direct replacement for the old outgoing solenoid (385-1749, KIT-SERVICE). The new screen is only needed if the air system is dirty.

1. Unplug the Amseal connection from the engine wiring harness.

2. Cut off the MAIN air supply to the starter.

3. Remove the small control air line from the solenoid valve body.

4. Remove the 3 screws connecting the solenoid valve to the starter body.

5. Remove the 4 screws that connecting the control module to the starter body.

6. Remove the control module.

7. Reverse the above process exactly to install the new control module, using Loctite 242 on all 7 screws. Plug in the module, then turn the air back on.