PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 211-7826 CYLINDER BLOCK LINERS FROM DEALER PARTS STOCK
Usage:
TEBE1178-00
Show/hide table
| 01Apr2014 |
U-172
A-129
D-162
O-150
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 211-7826 CYLINDER BLOCK LINERS FROM DEALER PARTS STOCK |
|
| 7750 | PI70511 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jul2014 |
PROBLEM
Show/hide table
| The 211-7826 Cylinder Block Liners could have a crack towards the top of the crown of the liner, but not limited to this specific area. |
ACTION REQUIRED
Show/hide table
| Inspect all 211-7826 Cylinder Block Liners in dealer parts stock. Note: 3500 Cylinder Packs are not affected by this issue. Check to determine if a cylinder block liner is within the suspect cylinder liner serial number range. Refer to Image 2. The last five digits on the bottom of the liner are the serial number. Refer to Image 1. If a 211-7826 Cylinder Block Liner IS NOT within the suspect range, return the liner to the original packaging. Mark the package to indicate it has been inspected according to this program. Return the part to dealer parts stock. If a 211-7826 Cylinder Block Liner IS within the suspect range, remove the liner from dealer parts stock. Refer to the Parts Disposition. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all 211-7826 Cylinder Block Liners inspected and possibly removed from dealer parts stock. 0.25 hours is allowed for each 211-7826 Cylinder Block Liner inspected. |
PARTS DISPOSITION
Show/hide table
| NACD: Hold all 211-7826 Cylinder Block Liners for a Parts Return Request (PRR). A Parts Return Request (PRR) will be issued to you through the Send-It-Back process after the claim is submitted. Make sure to list the service letter program number on the packing slip and include the closed work order paperwork. EAME, LACD, and APD: Hold all 211-7826 Cylinder Block Liners for 30 days for a possible Parts Return Request (PRR). Make sure to list the service letter program number on the packing slip and include the closed work order paperwork. If a Parts Return Request (PRR) is not issued to you after 30 days through the Send-It-Back process, handle the parts in accordance with your warranty bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL TRANSFER PUMP ON CERTAIN C4.4, C6.6, AND C7.1 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL TRANSFER PUMP ON CERTAIN C4.4, C6.6, AND C7.1 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3512C PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3512C PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE CYLINDER HEAD ON CERTAIN REMAN C27 AND 32 ENGINES AND LONG BLOCKS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE CYLINDER HEAD ON CERTAIN REMAN C27 AND 32 ENGINES AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE CYLINDER HEADS ON CERTAIN G3512C, G3512E, G3516C, G3520C, AND G3520E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE CYLINDER HEADS ON CERTAIN G3512C, G3512E, G3516C, G3520C, AND G3520E ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIRECT RACK WIRING ON CERTAIN 3512B PETROLEUM GENERATOR SET ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIRECT RACK WIRING ON CERTAIN 3512B PETROLEUM GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL SPILL CONTAINMENT GROUP ON CERTAIN C27 AND C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL SPILL CONTAINMENT GROUP ON CERTAIN C27 AND C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE ENCLOSURE DUCT GROUP ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE ENCLOSURE DUCT GROUP ON CERTAIN C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER PUMP ASSEMBLY ON CERTAIN 3056, C1.5, C2.2, C4.4, AND C6.6 MARINE ENGINE PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER PUMP ASSEMBLY ON CERTAIN 3056, C1.5, C2.2, C4.4, AND C6.6 MARINE ENGINE
PRODUCT SUPPORT PROGRAM FOR INSPECTING, REWORKING, OR POSSIBLY REPLACING THE HIGH PRESSURE FUEL PUMP ON CERTAIN C175-16 LOCOMOTIVE ENGINES AND C175-16 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSPECTING, REWORKING, OR POSSIBLY REPLACING THE HIGH PRESSURE FUEL PUMP ON CERTAIN C175-16 LOCOMOTIVE ENGINES AND C175-16 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RELOCATING POWER CABLES ON CERTAIN 4-WIRE UPS 250, AND UPS 500G UNINTERRUPTIBLE POWER SUPPLIES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RELOCATING POWER CABLES ON CERTAIN 4-WIRE UPS 250, AND UPS 500G UNINTERRUPTIBLE POWER SUPPLIES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 107-7330 OR 230-2520 CONNECTING ROD BEARINGS ON CERTAIN 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 107-7330 OR 230-2520 CONNECTING ROD BEARINGS ON CERTAIN 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER BYPASS SWITCH GP ON CERTAIN TH55-E70 AND TH55-E90 TRANSMISSIONS AND 3512C ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER BYPASS SWITCH GP ON CERTAIN TH55-E70 AND TH55-E90 TRANSMISSIONS AND 3512C ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A DAMPER ON CERTAIN 20R-3450 REMAN 3516B ENGINES IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A DAMPER ON CERTAIN 20R-3450 REMAN 3516B ENGINES IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 365-1772 AIR COMPRESSOR GROUP ON CERTAIN 3516C HD GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 365-1772 AIR COMPRESSOR GROUP ON CERTAIN 3516C HD GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512, AND 3512B GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512, AND 3512B GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE OIL FILL TUBE AND OIL LEVEL GAUGE ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE OIL FILL TUBE AND OIL LEVEL GAUGE ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4W-2232 ENGINE OIL PUMP OUTLET ELBOW ON CERTAIN C7 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4W-2232 ENGINE OIL PUMP OUTLET ELBOW ON CERTAIN C7 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C4.4, C6.6, AND C15 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C4.4, C6.6, AND C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 4W-2232 ENGINE OIL PUMP OUTLET ELBOW ON CERTAIN C7 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 4W-2232 ENGINE OIL PUMP OUTLET ELBOW ON CERTAIN C7 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE AND POSSIBLY REPLACING THE OIL COOLER ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE AND POSSIBLY REPLACING THE OIL COOLER ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SHIPPED LOOSE AIR CLEANER GROUP ON CERTAIN C15 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SHIPPED LOOSE AIR CLEANER GROUP ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 434-7484 COOLANT LINE AND POSSIBLY REPLACING THE 434-7485 COOLANT LINE ON CERTAIN G3508B PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 434-7484 COOLANT LINE AND POSSIBLY REPLACING THE 434-7485 COOLANT LINE ON CERTAIN G3508B PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT ENGINE HOUSING ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT ENGINE HOUSING ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN RETROFIT SELECTIVE CATALYTIC REDUCTION SYSTEMS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN RETROFIT SELECTIVE CATALYTIC REDUCTION SYSTEMS