Installation Of EMS (Electronic Monitoring System) Indicators{7450}
Usage:
All Cat Machines Equipped With EMS Indicators
New indicators plus extra parts are now given as service replacements for the former indicators. The light socket hole in the back of the new indicators is smaller in diameter than in the former indicators.
NOTE: Some machines are not equipped with lights in the indicators and the extra parts are not needed.
To install a new indicator equipped with a lamp, remove the existing socket assembly and lamp. Assemble the new 8D1313 Socket, 6D4163 Spring, 6D4162 Bushing, 8D1533 Spacer, 6D4161 Contact and 5D19 Lamp on the former wire.
Caterpillar Information System:
Use Of 6V4840 Tool Group To Install Water Ferrules{1201} Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Installation Of 5N7900 Air Starting Motor Lubricator{1451} Installation Of 5N7900 Air Starting Motor Lubricator{1451}
Use Of 6V4805 Valve Seat Insert Puller Group{0703} Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253} Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4040 Nitrogen Tire Inflation Group{4231} Use Of 6V4040 Nitrogen Tire Inflation Group{4231}
Assembly Of 6V97 Engine Stand{0630} Assembly Of 6V97 Engine Stand{0630}
Installation Of 1W4793 Governor Spring (High Idle){1264, 1265} Installation Of 1W4793 Governor Spring (High Idle){1264, 1265}
Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782} Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782}
Installation Of Electric (Digital) Tachometer Groups{7462} Installation Of Electric (Digital) Tachometer Groups{7462}
Installation of 5N7710 Fuel Injection Lines Group And 5N7741 Fuel Lines Drain Group{1250} Installation of 5N7710 Fuel Injection Lines Group And 5N7741 Fuel Lines Drain Group{1250}
Installation Of Replacement Parts For 3N7722, 8N2744, 1W1872, 1W1873, 1W1881 and 1W1882 Engine Oil Pump Groups{1304} Installation Of Replacement Parts For 3N7722, 8N2744, 1W1872, 1W1873, 1W1881 and 1W1882 Engine Oil Pump Groups{1304}
2W715 Turbocharger Cartridge Repair Kit{1053} 2W715 Turbocharger Cartridge Repair Kit{1053}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302} Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202} Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Installation Of 5N1948 And 2W3037 Sound Isolation Mounting Groups{1000, 3300, 7060} Installation Of 5N1948 And 2W3037 Sound Isolation Mounting Groups{1000, 3300, 7060}
Installation Of 6V4839 Cap And 15600 Snap Ring In 5P3508 Torque Multiplier{0614} Installation Of 6V4839 Cap And 15600 Snap Ring In 5P3508 Torque Multiplier{0614}
Using The 6V6000 Dial Bore Gauge Group{0761} Using The 6V6000 Dial Bore Gauge Group{0761}
Installation Of 3T9227 Wear Sleeve{3300} Installation Of 3T9227 Wear Sleeve{3300}
Installation Of Cylinder Head Assembly{1101} Installation Of Cylinder Head Assembly{1101}
Use Of 6V6124 Calibration Coil{0778, 0785} Use Of 6V6124 Calibration Coil{0778, 0785}
Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450} Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}
Installing The 3N3166 Crankshaft Seal And 2W1794 Wear Sleeve{1160, 1161} Installing The 3N3166 Crankshaft Seal And 2W1794 Wear Sleeve{1160, 1161}
Installation Of 3N4364 Core Assembly{1064} Installation Of 3N4364 Core Assembly{1064}
Modification of Marine Transmission Lubrication System{3300} Modification of Marine Transmission Lubrication System{3300}