System Schematic
Show/hide table
 | |
| Illustration 1 | g01263898 |
Show/hide table
 | |
| Illustration 2 | g01276023 |
Show/hide table
 | |
| Illustration 3 | g01276118 |
Show/hide table
 | |
| Illustration 4 | g01275988 |
Show/hide table
 | |
| Illustration 5 | g03338107 |
(1) Water pump (2) Emulsion pump (3) Machine speed sensor (4) Emulsion solenoid (5) Water spray solenoid (6) Water flow sensor (7) Reverse propulsion lever switch (8) Forward propulsion lever switch (9) Spray bar switch (10) Emulsion spray switch (11) Water spray switch (12) CAN resister 2 (13) Emulsion flow sensor (14) Resistor (18,000 ohms) (15) CAN resistor 1 (16) B+ from main power relay (17) "24-pin" connector (electronic display) (18) "40-pin" connector (electronic display) (19) Water ECM (20) Emulsion ECM (21) "A" connector (machine ECM) (22) "B" connector (machine ECM) | |
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Brake Accumulator - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Remove
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Menu Structure
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Fuel Filter and Water Separator - Remove and Install
The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452} The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452}
2013/02/22 Modified Oil Tubes, Adapter, and Elbows Are Used to Help Reduce the Possibility of Contamination on Certain 3500 Engines {1306, 1308}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Accumulator - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Brake Accumulator - Disassemble
C9.3 Tier 4 Final Engines Component Location
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 0041 - FMI 03
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 0041 - FMI 04