Brake Accumulator - Disassemble
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 149-5168 | 活动扳手 | 1 |
5P-3522 | 触针 | 3 | |
B | 5P-3520 | 活动扳手 | 1 |
6V-5843 | 螺栓 | 2 |
开始:
- 拆下制动蓄能器。
Show/hide table
蓄能器充满干氮气。 氮气突然释放可能会导致人身伤害。 为避免人身伤害,在拆解前,释放蓄能器中的氮气压力。 |
- 将保护器 (2) 从制动蓄能器 (1) 上拆下。
Show/hide table
图 2 g03338088 - 拆下阀盖 (3)。
- 排放蓄能器。 有关正确的步骤,请参阅专门说明书, "蓄能器排放和充压步骤"。
Show/hide table
图 3 g03338090 - 拆下施克拉德阀 (4)。
Show/hide table
图 4 g03338102 - 拆下阀 (5)。
Show/hide table
图 5 g03338105 - 将 O 形密封圈 (6) 从阀 (5) 上拆下。
Show/hide table
图 6 g03338126 - 使用工具 (A) 拆下端盖 (7)。
Show/hide table
图 7 g03338202 - 从端盖 (7) 上拆下 O 形密封圈 (9) 和支承环 (8)。
Show/hide table
图 8 g03338209 - 拆下接头 (10) 和 O 形密封圈。
Show/hide table
图 9 g03338241 - 使用工具 (B) 拆下端盖 (11)。
Show/hide table
图 10 g03338249 - 从端盖 (11) 上拆下 O 形密封圈 (12) 和支承环 (13)。
Show/hide table
图 11 g03338262 - 拆下活塞 (14)。
Show/hide table
图 12 g03338263 - 将密封件 (15)、 (16)、 (17)、 (18)、 (19)、 (20) 和 (21) 从活塞 (14) 上拆下。
- 对于其余的制动蓄能器,重复步骤 1 到 13。
Show/hide table
图 1 | g03338076 |
Caterpillar Information System:
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Accumulator - Remove and Install
2013/02/22 Modified Oil Tubes, Adapter, and Elbows Are Used to Help Reduce the Possibility of Contamination on Certain 3500 Engines {1306, 1308}
The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452} The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452}
2384C, 2484C, 559C and 579C Knuckleboom Loaders Fuel Filter and Water Separator - Remove and Install
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Menu Structure
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System System Schematic
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C9.3 Tier 4 Final Engines Component Location
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 0041 - FMI 03
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 0041 - FMI 04
2384C, 2484C, 559C and 579C Knuckleboom Loaders Engine Oil Filter and Base - Remove and Install
Field Installation of the 387-6455 Auxiliary Lines Kit , 387-6456 Auxiliary Lines Kit , and 387-6457 Auxiliary Lines Kit {5057} Field Installation of the 387-6455 Auxiliary Lines Kit , 387-6456 Auxiliary Lines Kit , and 387-6457 Auxiliary Lines Kit {5057}
C175-16 and C175-20 Engines for Caterpillar Built Machines High Pressure Fuel Rails - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Secondary Fuel Filter and Base - Remove and Install
2014/08/11 New Helical Gears are Used on Certain 3500 Off-Highway Truck Engines {1204, 1206}
2014/05/30 An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30 Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
A New Oil Fill Group Is Now Used on Certain Wheel Feller Bunchers{1316} A New Oil Fill Group Is Now Used on Certain Wheel Feller Bunchers{1316}
Air Conditioning Functionality and Electrical Module Protection{1408, 7301, 7320} Air Conditioning Functionality and Electrical Module Protection{1408, 7301, 7320}