Engine Oil Pan - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | - | LOCTITE® 高温法兰密封胶 | - |
注: 请参阅技术规格 UENR3421 "发动机设计"，了解非指定的发动机扭矩值。
- 有关正确的排放和加注步骤，请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
Show/hide table
图 1 g02797578 - 拆下螺栓 (2) 后拆下油底壳 (1)。
Show/hide table
图 2 g02797579 - 将工具 (A) 从油底壳 (1) 和缸体 (3) 表面拆下。
- 将大约
3.0 to 5.0 mm (0.12 to 0.19 inch) 厚的工具 (A) 涂抹到缸体表面。 在涂抹工具 (A) 后的 20 分钟内重新组装部件。- 按与拆卸相反的顺序安装油底壳 (1)。
Caterpillar Information System:
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Brake Accumulator - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Remove
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
Procedure for Converting Cat® Detect 12 Radar Factory Ready Harnesses to 8 Radar Systems on Certain 785C, 785D, 789C and 789D Off-Highway Trucks{7348, 7490} Procedure for Converting Cat® Detect 12 Radar Factory Ready Harnesses to 8 Radar Systems on Certain 785C, 785D, 789C and 789D Off-Highway Trucks{7348, 7490}
C4.4 and C7.1 Engines System Overview
C3.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System System Schematic
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Menu Structure
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Fuel Filter and Water Separator - Remove and Install
The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452} The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452}
2013/02/22 Modified Oil Tubes, Adapter, and Elbows Are Used to Help Reduce the Possibility of Contamination on Certain 3500 Engines {1306, 1308}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Accumulator - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Brake Accumulator - Disassemble