Camshaft Gear - Remove and Install
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0510 | 冲头总成 | 1 |
| B | 8B-7551 | 拉拔器组件 | 1 |
| C | 8H-0663 | 轴承拉拔器 | 1 |
开始:
- 拆下凸轮轴。
注: 请参阅技术规格 UENR3421 "发动机设计"，了解非指定的发动机扭矩值。
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 使用工具 (A) 从凸轮轴 (2) 上拆下凸轮轴齿轮 (1)。
- 如有必要，加热滚柱轴承的座圈 (3) 以便进行拆卸。
Show/hide table
图 2 g02796779 - 将板 (5) 从凸轮轴 (2) 上拆下。
- 如有必要，将键 (4) 从凸轮轴 (2) 前端拆下。
Show/hide table
| |
| 图 1 | g02796778 |
- 按与拆卸相反的顺序安装凸轮轴齿轮 (1)。
- 使用工具 (B) 和工具 (C) 将凸轮轴齿轮 (1) 安装到凸轮轴 (2) 上。
- 确保凸轮轴齿轮和键清洁且无磨损和损坏。
Show/hide table
图 3 g02807848
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Brake Accumulator - Remove and Install
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Remove
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
Procedure for Converting Cat® Detect 12 Radar Factory Ready Harnesses to 8 Radar Systems on Certain 785C, 785D, 789C and 789D Off-Highway Trucks{7348, 7490} Procedure for Converting Cat® Detect 12 Radar Factory Ready Harnesses to 8 Radar Systems on Certain 785C, 785D, 789C and 789D Off-Highway Trucks{7348, 7490}
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System System Schematic
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Menu Structure
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Fuel Filter and Water Separator - Remove and Install
The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452} The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452}
2013/02/22 Modified Oil Tubes, Adapter, and Elbows Are Used to Help Reduce the Possibility of Contamination on Certain 3500 Engines {1306, 1308}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Accumulator - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Brake Accumulator - Disassemble
C9.3 Tier 4 Final Engines Component Location