Brake Accumulator - Remove and Install
Start By:
- Connect the steering frame lock.
- Release the system hydraulic pressure.
- Retain the hydraulic tank oil.
- Remove the bolts and open door (1).
Show/hide table
Illustration 2 g03337987 - Remove platform (2).
Show/hide table
Illustration 3 g03337991 - Disconnect hose assembly (3).
Show/hide table
Illustration 4 g03337997 - Remove bolts (4).
Show/hide table
Illustration 5 g03338003 - Remove clamp (5) and remove brake accumulator (6).
Show/hide table
Illustration 6 g03338028 - Repeat Steps 3 through 4 for the remaining brake accumulator (7).
- Remove brake accumulator (7).
- Discharge the brake accumulators. Refer to Special Instruction, "Accumulator Discharging and Charging Procedures" for the proper procedure.
Show/hide table
Illustration 1 | g03337982 |
- Install brake accumulators (7) and (6) in the reverse order of removal.
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C3.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C3.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Install
C3.3B Engines for Caterpillar Built Machines Crankshaft and Main Bearings - Remove
C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
C3.3B Engines for Caterpillar Built Machines V-Belts - Remove and Install
C3.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
Procedure for Converting Cat® Detect 12 Radar Factory Ready Harnesses to 8 Radar Systems on Certain 785C, 785D, 789C and 789D Off-Highway Trucks{7348, 7490} Procedure for Converting Cat® Detect 12 Radar Factory Ready Harnesses to 8 Radar Systems on Certain 785C, 785D, 789C and 789D Off-Highway Trucks{7348, 7490}
C4.4 and C7.1 Engines System Overview
C4.4 and C7.1 Engines Welding Precaution
C3.3B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft and Valve Lifters - Remove and Install
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System System Schematic
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Menu Structure
C3.3B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C3.3B Engines for Caterpillar Built Machines Rocker Shaft and Push Rod - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Fuel Filter and Water Separator - Remove and Install
The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452} The Air Inlet Tube Assembly May Fail on 770G and 772G Off-Highway Trucks{1051, 1054, 7452}
2013/02/22 Modified Oil Tubes, Adapter, and Elbows Are Used to Help Reduce the Possibility of Contamination on Certain 3500 Engines {1306, 1308}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Accumulator - Remove and Install