1990/12/24 Caterpillar


New Tube And Bracket Provide Clearance For Alternator{1380,1405}

Usage:


3508 ( 23Z ),
3512 ( 24Z ),
3516 ( 25Z ) Generator Set Engines

Description of Change: A new tube, bracket, and nut are used in the water lines group. The new tube contains several new angles and is sightly longer to accommodate these changes. The new bracket is designed to secure the new tube. The new hex nut is hardened to allow it to retain its torque under vibration. When used together, the new parts provide adequate clearance for installation of a 60 ampere alternator.

Adaptable To: The part number for the improved 7C3044 Water (By-Pass) Lines Group has not changed. The new 7E9075 Tube (1) is a direct replacement for the former 7C3041 Tube. The new 7E9329 Bracket (2) is a direct replacement for the former 7C3042 Bracket. See Illustration 1. The new 1F7958 Hardened Nut (3) replaces the former 1D4719 Nut. See Illustration 2. This change is adaptable to first production.


Illustration 1. Right side view of the 7C3044 Water (By-Pass) Lines Group.


Illustration 2. Front view.

Caterpillar Information System:

1990/12/24 Auxiliary Oil Filter Groups Used To Increase Oil Capacity And Extend Oil Change Interval To 750 Hours{1318,7534}
1990/12/24 Oversized Intake And Exhaust Valve Seat Inserts Available For Spark-Ignited Engine Heads{1103}
1990/12/24 New Seals Available For Parts Service Of Noncurrent Water Lines Group{1380,1155,1378}
1990/12/24 New 3E0020 Vehicle Speed Buffer Used{1914,1900}
1990/12/24 Update Information For Exhaust Manifolds{1059}
1990/12/24 Air Pressure Settings For Pneumatic Selector Control Valve On Reintjes® Marine Transmissions{3313}
1990/12/24 Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24 Incorrect Specification For Tightening Turbocharger Compressor Nut In Service Manual For 3306B Diesel Truck Engine, SEBR0545-01{1052}
1990/12/24 Sealed Alternators Available For Earthmoving Applications{1405}
1990/12/17 New Ether Starting Aid Groups Available{1456}
1990/12/17 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults){1901,1902}
1990/12/17 New Rotor Used In BrakeSaver Group; Regulator Valve Improved{1155}
1991/01/07 Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07 New Boost Line Hose Assemblies Withstand Higher Temperatures{1081,1057,1088,7554}
1991/01/14 4C8753 Extended Collet Available; Problems With 8T1002 Probe For Fuel Setting{0782}
1991/01/14 Air Compressor Manifolds Are No Longer Available{1803}
1991/01/14 New Battery Load Tester Available To Service Six, Eight, And 12 Volt Batteries{0785,1401}
1991/01/28 New Bracket Assemblies Used In Lifter Group{1209,1281}
1991/01/28 Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/01/28 New Top Piston Ring Improves Wear Resistance{1215}
1991/01/28 Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/02/11 New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11 New Altronic V Magneto Used{1552}
1991/02/11 New Water Temperature Regulator{1355}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.