R1600H Load Haul Dump Power Train Caterpillar


Oil Filter (Transmission)

Usage:

R1600H 9SD



Illustration 1g02837216

Location of the transmission oil filter

The transmission oil filter is located at the front of the engine compartment on the cab side.




Illustration 2g01037730

Components of the transmission oil filter

(1) Bypass valve

(2) Outlet passage

(3) Inlet passage

(4) Filter element

(5) Housing

Pressure oil from the transmission charging pump flows into the filter base through inlet passage (3). The oil flows through the filter base to housing (5). The oil fills the space between the inside of housing (5) and filter element (4). Normally, oil flows through filter element (4) and then to outlet passage (2). The oil then flows to the remainder of the transmission hydraulic system. Filter element (4) stops any debris that is in the oil.

If filter element (4) becomes full of debris, the restriction to the flow of oil causes a pressure increase inside the filter. The increase in pressure causes bypass valve (2) to open. The oil then flows to the transmission hydraulic system. When the oil bypasses the filter element (4), debris in the oil will damage the other components in the transmission hydraulic system.

Correct maintenance will ensure filter element (5) does not fill with debris and stop the flow of oil to the transmission hydraulic system.

Caterpillar Information System:

2470C, 2570C and 2670C Wheel Feller Bunchers Machine Systems Piston Pump (Fan) - Assemble
2470C, 2570C and 2670C Wheel Feller Bunchers Machine Systems Piston Pump (Fan) - Disassemble
2013/02/04 A New Torque Specification Is Used for the V-Band Clamp of the Turbocharger on C175 Off-Highway Truck Engines {1052, 7553}
773G and 775G OFF-Highway Trucks Engine Supplement Engine and Torque Converter - Remove and Install
Product Identification Numbers (PIN) Location Guide Transmission
773G and 775G OFF-Highway Trucks Machine Systems Oil Filter (Steering Pump Case Drain) - Remove and Install
770G and 772G Off-Highway Truck Steering System Pump Control Valve (Pressure, Flow Compensator)
422F, 428F, 432F, 434F and 444F Backhoe Loaders Equipment Lowering with Engine Stopped
Product Identification Numbers (PIN) Location Guide Feller Buncher (Wheel)
773G and 775G OFF-Highway Trucks Machine Systems Oil Filter (Steering) - Remove and Install
Cat® Grade and Slope v1.2x for Pavers and Cold Planers General Information
773G and 775G OFF-Highway Trucks Machine Systems Piston Pump (Steering) - Remove and Install
R1600H Load Haul Dump Power Train Gear Pump (Transmission Charging and Torque Converter Scavenge)
R1600H Load Haul Dump Power Train Magnetic Screen (Transmission)
R1600H Load Haul Dump Power Train MID 081 - CID 0672 - FMI 08
R1600H Load Haul Dump Power Train MID 081 - CID 0679 - FMI 03
R1600H Load Haul Dump Power Train MID 081 - CID 0679 - FMI 05
R1600H Load Haul Dump Power Train MID 081 - CID 0679 - FMI 06
CP74B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Systems Refrigerant Compressor
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Refrigerant Condenser and Mounting
C7.1 Engines For Caterpillar Built Machines Event Codes
2012/05/08 Improved Fuel Filter Now Used on R2900G Load Haul Dump Machines {1261, 1263, 1274}
2012/04/24 Improved Fuel Filter Now Used on R1700G Load Haul Dump Machines {1261, 1263, 1274}
R2900G Load Haul Dump Fuel System - Prime
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.