Piston Pump (Hydrostatic)
Show/hide table
Illustration 1 | g01560184 |
Show/hide table
Illustration 2 | g01560193 |
Show/hide table
Specifications for 258-2405 Piston Pump Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
-     | The rotation of pump is Clockwise.     | ||
-     | The displacement per revolution is 45 ± 1 cc (2.75 ± 0.06 cu in).     |
||
-     | The maximum continuous speed is 3200 rpm.     | ||
-     | The intermediate over speed is 3600 rpm.     | ||
1     | 2     | Torque to 10 ± 1 N·m (90 ± 9 lb in).     |
|
2     | 1     | 278-8746 Relief Valve Gp     | Torque to 44 ± 3 N·m (32 ± 2 lb ft). Maximum pressure at 56 L/min (14.8 US gpm) 3200 kPa (464 psi). Minimum pressure at 20 L/min (5.3 US gpm) 2600 kPa (377 psi).     |
3     | 1     | 278-8743 Solenoid Valve Gp     | Torque to 45 ± 5 N·m (33 ± 4 lb ft).     |
4     | 4     | 278-8745 Relief Valve Kit     | Torque to 80 ± 10 N·m (60 ± 7 lb ft).     |
5     | 12     | Torque to 13 ± 1 N·m (115 ± 9 lb in).     |
|
6     | 12     | Torque to 8 ± 1 N·m (70 ± 9 lb in).     |
|
7     | 2     | Torque for swashplate feedback pins 25 ± 2 N·m (220 ± 18 lb in).     |
|
8     | 6     | Torque to 110 ± 10 N·m (80 ± 7 lb ft).     |
|
9     | 8     | Torque to 14 ± 1 N·m (125 ± 9 lb in).     |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install - Filter Bypass
793F CMD Off-Highway Truck Steering Electronic Control System Service Tools
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Diagnostic Capabilities
773G and 775G OFF-Highway Trucks Engine Supplement Clean Emissions Module - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Data Link
C27 and C32 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Electrical Output Components
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Crankshaft - Remove and Install
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement Engine - Remove
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement Engine - Install
789D and 789D XQ Off-Highway Truck Air System and Brakes Air Compressor Governor
Cat® Command for Dozing, Remote Control Operator Station Operator Station - Check - Daily
793F CMD Off-Highway Truck/Tractor Braking System Traction Control System (TCS) - Test
Installation of the 2Q-8782 Rear View Camera Kit on the 814F Wheel Dozer, 815F Soil Compactor, and 816F Landfill Compactor{1408, 7348, 7490} Installation of the 2Q-8782 Rear View Camera Kit on the 814F Wheel Dozer, 815F Soil Compactor, and 816F Landfill Compactor{1408, 7348, 7490}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000} 439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
C13, C15, and C18 Tier 4 Final Engines Air Lines
® for Dozing, Semi-Autonomous Tractor System (SATS) Off Board Radio - Check
R3000H Load Haul Dump Differential and Final Drive Oil (With Axle Oil Cooler) - Change
777G Off-Highway Truck Oil Filter (Steering Pump Case Drain) - Replace
777G Off-Highway Truck Radiator Core and Aftercooler - Clean