Installation of the 2Q-8782 Rear View Camera Kit on the 814F Wheel Dozer, 815F Soil Compactor, and 816F Landfill Compactor{1408, 7348, 7490} Caterpillar

Landfill Compactor:

816F Series 2 (S/N: BZR1-UP)

Soil Compactor:

815F Series 2 (S/N: BYN1-UP)

Wheel Dozer:

814F Series 2 (S/N: BXG1-UP)

Introduction

This Special Instruction will provide information on the installation of 2Q-8782 Rear View Camera Kit .

Do not perform any procedure in this publication or order any parts until you understand the information that is contained in this publication

Show/hide table

Shut off engine and remove key before performing maintenance or repair work. Failure to do so may result in personal injury due to inadvertant machine operation. Do not start the engine or move any of the controls if there is a "Do Not Operate" or similar warning tag attached to the start switch or controls.

Parts List

Assembly

Group A

Illustration 1	g02902530
(AA) Connection with pins (AB) Connection with sockets

1. Attach camera group (6) and grommet (11) to bracket assembly (10).

2. Attach bracket assembly (10) to the frame using washer (2), bolt (9) and spacer (7) .

3. Route cable assembly (4) and cable assembly (3). Use cable straps (5) as required. Join cable assemblies (3) and (4) with connectors (AA) and (AB) .

Group C

Illustration 2	g02913416

1. Attach camera group (6) and grommet (24) to bracket assembly (28).

2. Attach bracket assembly (28) to the frame using washer (2) and bolt (25) .

3. Route cable assembly (4) and cable assembly (3). Use cable straps (5) as required. Join cable assemblies (3) and (4) with connectors (AA) and (AB) .

Group B

Illustration 3	g02912722

1. Mount the camera display group (18) with the hardware as illustrated.

2. Run the cable as illustrated and use cable straps (13) to secure the cable as needed.