Clean Emissions Module - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 140-7742     | Sleeve     | 2     |
Start By:
- Remove hood assembly
- Remove clamps (1) .
Show/hide table
Illustration 1 | g02751677 |
- Remove ball clamp (2) and tube (3) .
Show/hide table
Illustration 2 | g02751686 |
- Remove clamps (4) .
Show/hide table
Illustration 3 | g02751717 |
- Attach Tooling (A) and a suitable lifting device to clean emissions module (5). The weight of clean emissions module (5) is approximately 165 kg (360 lb)
Show/hide table
Illustration 4 | g02751918 |
- Remove bolts (6) and clean emissions module (5) .
Show/hide table
Illustration 5 | g02751996 |
Installation Procedure
- Install clean emissions module (5) in the reverse order of removal.
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Data Link
C27 and C32 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Electrical Output Components
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Crankshaft - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Cylinder Liner - Remove and Install
793F CMD Off-Highway Truck/Tractor Braking System Diagnostic Code List
789D Off-Highway Truck Torque Converter Hydraulic System
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Diagnostic Capabilities
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
793F CMD Off-Highway Truck Steering Electronic Control System Service Tools
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install - Filter Bypass
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump (Hydrostatic)
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement Engine - Remove
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement Engine - Install
789D and 789D XQ Off-Highway Truck Air System and Brakes Air Compressor Governor
Cat® Command for Dozing, Remote Control Operator Station Operator Station - Check - Daily
793F CMD Off-Highway Truck/Tractor Braking System Traction Control System (TCS) - Test
Installation of the 2Q-8782 Rear View Camera Kit on the 814F Wheel Dozer, 815F Soil Compactor, and 816F Landfill Compactor{1408, 7348, 7490} Installation of the 2Q-8782 Rear View Camera Kit on the 814F Wheel Dozer, 815F Soil Compactor, and 816F Landfill Compactor{1408, 7348, 7490}