Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove
Removal Procedure
Start By:
- Remove engine enclosure.
Show/hide table
Personal injury can result from hot coolant, steam and alkali. At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns. Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand. Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns. Cooling System Conditioner contains alkali. Avoid contact with skin and eyes. |
- Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for draining and filling procedures.
- Refer to Operations and Maintenance Manual, "Cooling System Coolant - Change" for draining and filling procedure.
- Disconnect harness assembly (1). Remove hoses (2) .
Show/hide table
Illustration 1 | g02731497 |
- Remove hoses (3) and (6). Remove cable strap (5). Remove shunt tank (4) .
Show/hide table
Illustration 2 | g02731503 |
- Remove clamp (9). Remove hose (10) .
Show/hide table
Illustration 3 | g02731513 |
- Remove hoses (11) and (12) .
Show/hide table
Illustration 4 | g02731540 |
Show/hide table
Illustration 5 | g02731545 |
- Attach a suitable lifting device. The weight of cooling package assembly (15) is approximately 227 kg (500 lb). Remove bolts (13) and (14). Repeat this step for the other side.
Show/hide table
Illustration 6 | g02731549 |
- Remove cooling package (15)
Caterpillar Information System:
Snow Push Work Tool Supplement Cutting Edges - Inspect/Replace
Snow Push Work Tool Supplement Side Plate - Replace
R1600H Load Haul Dump Power Train Rim Mounting
R1600H Load Haul Dump Power Train Final Drive and Wheel
793F AC Off-Highway Truck Hydraulic Fan and Steering System Piston Pump (Steering) Pressure - Test and Adjust
C2.6 and C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
793F AC Off-Highway Truck Hydraulic Fan and Steering System Pressure Switches
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3050 - FMI 14
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3050 - FMI 09
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 08
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor - Demand Fan
789D and 789D XQ Off-Highway Trucks Cooling System Coolant (ELC) - Change
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
C27 and C32 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Parking Brake Control
Cat® Fleet Onboard Software Version 3.1 Display - Clean
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - High Flow) (Non-Tilt
CP54B, CS54B and CS64B Vibratory Soil Compactors Engine Supplement Water Separator and Base - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (5-Bank) - Travel) (Low Flow
789D and 789D XQ Off-Highway Trucks Cooling System Coolant Extender (ELC) - Add
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Service Brake Control
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid Valve and Manifold (Blower Fan, Final Drive Lubrication, Steering)
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (5-Bank) - Travel) (High Flow
Snow Push Work Tool Supplement Side Plate Skid Plate - Inspect/Replace