Water Separator and Base - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench As     | 1     |
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Turn the battery disconnect switch to the OFF position. Turn the fuel supply to the OFF position.
- Disconnect harness assembly (3). Disconnect tube assemblies (2). Drain the fuel from fuel filter (4) into a suitable container for disposal. Remove fuel filter from fuel filter base (1) using Tooling (A). Remove fuel filter base (1) .
Show/hide table
Illustration 1 | g02731603 |
Installation Procedure
- Install fuel filter base (1) in the reverse order of removal.
- Remove the air from the fuel system. Refer to Operation and Maintenance Manual, " Fuel System - Prime".
Caterpillar Information System:
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - High Flow) (Non-Tilt
Cat® Fleet Onboard Software Version 3.1 Display - Clean
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Parking Brake Control
C27 and C32 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
CP54B, CS54B and CS64B Vibratory Soil Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove
Snow Push Work Tool Supplement Cutting Edges - Inspect/Replace
Snow Push Work Tool Supplement Side Plate - Replace
R1600H Load Haul Dump Power Train Rim Mounting
R1600H Load Haul Dump Power Train Final Drive and Wheel
793F AC Off-Highway Truck Hydraulic Fan and Steering System Piston Pump (Steering) Pressure - Test and Adjust
C2.6 and C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (5-Bank) - Travel) (Low Flow
789D and 789D XQ Off-Highway Trucks Cooling System Coolant Extender (ELC) - Add
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Service Brake Control
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid Valve and Manifold (Blower Fan, Final Drive Lubrication, Steering)
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (5-Bank) - Travel) (High Flow
Snow Push Work Tool Supplement Side Plate Skid Plate - Inspect/Replace
CP54B, CS54B and CS64B Vibratory Soil Compactors Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install - Secondary Fuel Filter
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2200 - FMI 01
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2200 - FMI 02
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2200 - FMI 03
789D and 789D XQ Off-Highway Trucks Cooling System Coolant Level - Check
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2200 - FMI 04