Final Drive and Wheel
Show/hide table
 | |
| Illustration 1 | g02731370 |
Show/hide table
| Specification for 154-9657 Final Drive and Wheel Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | Rubber toric rings and all surfaces in contact with seals must be clean and dry at assembly. Apply a thin layer of oil to the contacting surfaces of the metal seals just before installation. Seal rings must be assembled square with the bore. Toric seals must not be bulged or twisted. | ||
| 2 | 3 | 221-8231 Planetary Gear | Inside diameter of the planetary gear is 66.274 ± 0.010 mm (2.6092 ± 0.0004 inch). |
| 3 | 3 | 4V-4501 Planetary Shaft | Outside diameter of the planetary shaft is 47.193 ± 0.008 mm (1.8580 ± 0.0003 inch). |
| 4 | 6 | 4V-5233 Thrust Washers | Assemble planetary so the Thrust Washers are against the planetary gear face. |
| 5 | 8 | 7K-6058 Bolt | Torque to 60 ± 12 N·m (44 ± 9 lb ft) after the shims have been installed between the retainer and the spindle. Then turn an additional 120 ± 10°. |
| 6 | 1 | 1J-2176 O-Ring Seal | Lubricate the contacting surfaces of the seal with the lubricant that is being sealed. |
| 7 | 20 | 1A-1135 Bolt | Torque to 270 ± 25 N·m (200 ± 20 lb ft). |
| 8 | 16 | 5D-3290 Taperlock Stud | Apply Loctite 263 to the threads of the studs prior to installation. Install the 16 taperlock studs to the full depth of stud thread. |
| Torque to 70 N·m (52 lb ft). |
|||
| 9 | 1 | 1J-2176 O-Ring Seal | Lubricate the contacting surfaces of the seal with the lubricant that is being sealed. |
| 1 | 8D-2714 O-Ring Seal | ||
| 1 | 2R-0239 O-Ring Seal | ||
Caterpillar Information System:
793F AC Off-Highway Truck Hydraulic Fan and Steering System Piston Pump (Steering) Pressure - Test and Adjust
C2.6 and C3.3B Engines for Caterpillar Built Machines Bearing Clearance - Check
793F AC Off-Highway Truck Hydraulic Fan and Steering System Pressure Switches
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3050 - FMI 14
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3050 - FMI 09
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 08
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor - Demand Fan
789D and 789D XQ Off-Highway Trucks Cooling System Coolant (ELC) - Change
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 04
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3022 - FMI 03
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Right Hand
R1600H Load Haul Dump Power Train Rim Mounting
Snow Push Work Tool Supplement Side Plate - Replace
Snow Push Work Tool Supplement Cutting Edges - Inspect/Replace
CP54B, CS54B and CS64B Vibratory Soil Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
C27 and C32 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Parking Brake Control
Cat® Fleet Onboard Software Version 3.1 Display - Clean
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - High Flow) (Non-Tilt
CP54B, CS54B and CS64B Vibratory Soil Compactors Engine Supplement Water Separator and Base - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (5-Bank) - Travel) (Low Flow
789D and 789D XQ Off-Highway Trucks Cooling System Coolant Extender (ELC) - Add