Boom - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 6V-4035     | 套筒     | 1     |
1P-1839 | 轴承拆卸工具适配器     | 1     | |
4C-5809 | 电动液压泵总成     | 1     | |
5H-9718 | 油缸     | 1     | |
4C-9634 | 拉拔器螺柱     | 1     |
开始:
- 拆下动臂滑轮组。
- 拆下负载滑轮组。
Show/hide table
当您使用液压油缸和拉拔器螺柱时,务必确保拉拔器螺柱的额定容量达到或超过液压油缸的额定容量。 如果拉拔器螺柱未达到或超过液压油缸的额定容量,拉拔器螺柱可能突然发生故障。 拉拔器螺柱的突然故障可能导致人身伤亡。 |
- 将适当的起吊设备连接到动臂 (1) 上。 动臂 (1) 的重量约为 1588 kg (3500 lb)。
Show/hide table
图 1 | g01251016 |
- 拆下销组件 (2) 。 对另一边的销组件重复此步骤。
- 拆下动臂 (1) 。
- 使用工具 (A) 以将衬套 (3) 从动臂 (1) 的两侧上拆下。
Show/hide table
图 2 | g01250236 |
安装步骤
- 按与拆卸相反的顺序安装动臂 (1) 。
Caterpillar Information System:
2011/09/14 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
PL83 and PL87 Pipelayers Machine Systems Cable - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Refrigerant Accumulator - Remove and Install
2015/04/07 New VIMSpc Software Is Now Available On Certain Cat Product {0785, 7601}
422F, 428F, 432F, 434F and 444F Backhoe Loaders Hydraulic Oil Sample - Obtain
773G and 775G Off-Highway Trucks Specifications
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Fuel System Water Separator - Drain
PL87 Pipelayer Machine Systems Drawbar - Remove and Install
Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540} Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540}
2012/02/06 The Buffers for the Exhaust Temperature Sensors Are Relocated on C175 Engines in 793F, 795F, and 797F Off-Highway Trucks {1408}
Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154} Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154}
428F, 432F, 434F and 444F Backhoe Loaders Additional Messages
PL87 Pipelayer Machine Systems Cooler Bypass Valve - Remove and Install
C9.3 Engines for Caterpillar Built Machines Mounting Straps
C9.3 Engines for Caterpillar Built Machines Mounting Straps
PL83 and PL87 Pipelayers Machine Systems Boom Sheave Block (Lower) - Disassemble
2011/09/12 An Improved Fan Shroud Assembly Is Now Used on Certain Off-Highway Trucks {1356}
773G and 775G Off-Highway Truck Suction Screen (Transmission Scavenge) - Clean
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Crankcase Guard (Front) - Remove and Install
R1600G Load Haul Dump 3176C Engine Supplement Radiator Cap
C9.3 Tier 4 Final Engines Camshaft
C9.3 Engines for Caterpillar Built Machines Camshaft
C7.1 Engines For Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
C7.1 Engines For Caterpillar Built Machines Diagnostic Trouble Codes