Drawbar - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 189-0410 | 钩环组件 | 2 |
- 将蓄电池断路开关转到断开位置。
- 由两个人卸下盖 (1) 。 防护罩 (1) 的重量约为 36 kg (80 lb)。
Show/hide table
 | |
| 图 1 | g02672097 |
- 将工具 (A) 固定到牵引杆 (3) 上。 将适当的起吊设备附接到牵引杆 (3) 。 牵引杆 (3) 的重量约为 454 kg (1000 lb)。 拆下螺栓 (2 ) 。 拆下牵引杆 (3) 。
Show/hide table
 | |
| 图 2 | g02672098 |
安装步骤
- 按与拆卸相反的顺序安装牵引杆 (3) 。
Caterpillar Information System:
Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540} Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540}
2012/02/06 The Buffers for the Exhaust Temperature Sensors Are Relocated on C175 Engines in 793F, 795F, and 797F Off-Highway Trucks {1408}
Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154} Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154}
428F, 432F, 434F and 444F Backhoe Loaders Additional Messages
C7.1 Engines For Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
C7.1 Engines For Caterpillar Built Machines Intake Manifold Air Pressure Is Low
428F, 432F, 434F and 444F Backhoe Loaders Safety Messages
C7.1 Engines For Caterpillar Built Machines Inlet Air Temperature Is High
C7.1 Engines For Caterpillar Built Machines Fuel Temperature Is High
C7.1 Engines For Caterpillar Built Machines Fuel Rail Pressure Problem
C7.1 Engines For Caterpillar Built Machines Fuel Consumption Is Excessive
C7.1 Engines For Caterpillar Built Machines Exhaust Has Excessive White Smoke
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Fuel System Water Separator - Drain
773G and 775G Off-Highway Trucks Specifications
422F, 428F, 432F, 434F and 444F Backhoe Loaders Hydraulic Oil Sample - Obtain
2015/04/07 New VIMSpc Software Is Now Available On Certain Cat Product {0785, 7601}
PL83 and PL87 Pipelayers Machine Systems Refrigerant Accumulator - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Cable - Remove and Install
2011/09/14 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
PL83 and PL87 Pipelayers Machine Systems Boom - Remove and Install
PL87 Pipelayer Machine Systems Cooler Bypass Valve - Remove and Install
C9.3 Engines for Caterpillar Built Machines Mounting Straps
C9.3 Engines for Caterpillar Built Machines Mounting Straps
PL83 and PL87 Pipelayers Machine Systems Boom Sheave Block (Lower) - Disassemble