Cable - Remove and Install
拆卸步骤
Show/hide table
 |
不要使用扭曲、散开或有磨损点的钢绳。 当搬动钢丝绳时戴上手套。 |
Show/hide table
|
磨损的钢绳会造成人员伤亡。 磨损或断丝的钢绳会断绳伤人。 检查钢绳的状况。 如果钢绳磨损或断丝，换上新的钢绳。 |
- 解开钢轮组件 (3) 上的电缆 (1) 。
Show/hide table
 | |
| 图 1 | g02673356 |
- 将锁 (2) 和电缆 (1) 从钢轮组件 (3) 上拆下。
- 如有需要，重复步骤 1 和 2 以将吊索从吊钩用绞盘泵上拆下。
安装步骤
- 按与拆卸相反的顺序安装电缆 (1) 。
Caterpillar Information System:
PL83 and PL87 Pipelayers Machine Systems Refrigerant Accumulator - Remove and Install
2015/04/07 New VIMSpc Software Is Now Available On Certain Cat Product {0785, 7601}
422F, 428F, 432F, 434F and 444F Backhoe Loaders Hydraulic Oil Sample - Obtain
773G and 775G Off-Highway Trucks Specifications
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Fuel System Water Separator - Drain
PL87 Pipelayer Machine Systems Drawbar - Remove and Install
Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540} Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540}
2012/02/06 The Buffers for the Exhaust Temperature Sensors Are Relocated on C175 Engines in 793F, 795F, and 797F Off-Highway Trucks {1408}
Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154} Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154}
428F, 432F, 434F and 444F Backhoe Loaders Additional Messages
C7.1 Engines For Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
C7.1 Engines For Caterpillar Built Machines Intake Manifold Air Pressure Is Low
2011/09/14 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
PL83 and PL87 Pipelayers Machine Systems Boom - Remove and Install
PL87 Pipelayer Machine Systems Cooler Bypass Valve - Remove and Install
C9.3 Engines for Caterpillar Built Machines Mounting Straps
C9.3 Engines for Caterpillar Built Machines Mounting Straps
PL83 and PL87 Pipelayers Machine Systems Boom Sheave Block (Lower) - Disassemble
2011/09/12 An Improved Fan Shroud Assembly Is Now Used on Certain Off-Highway Trucks {1356}
773G and 775G Off-Highway Truck Suction Screen (Transmission Scavenge) - Clean
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Crankcase Guard (Front) - Remove and Install
R1600G Load Haul Dump 3176C Engine Supplement Radiator Cap
C9.3 Tier 4 Final Engines Camshaft
C9.3 Engines for Caterpillar Built Machines Camshaft