428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Caterpillar


Fuel System Water Separator - Drain

Usage:

428F2 HWN
Disa furnizime me karburant mund të mos përshtaten me standardin minimal për lubricitetin e karburantit. Caterpillar rekomandon përdorimin e karburanteve që përmbushin specifikime minimale të caktuara. Referojuni Botimit special, SEBU6250, "Rekomandime mbi lëngjet e makinerive Caterpillar".


NJOFTIM

Zbrazeni çdo ditë ose çdo 10 orë ujin nga ndarësi i ujit. Gjithashtu, zbrazeni çdo javë ose çdo 50 orë ujin nga depozita e karburantit. Moskryerja e kësaj mund të shkaktojë dëmtim të sistemit të karburantit.


Ndarësi i ujit/filtri i karburantit gjendet në anën e majtë të ndarjes së motorit.



Ilustrimi 1g03182019

  1. Lironi valvulin e zbrazjes në pjesën e poshtme të filtrit të karburantit. Lëreni ujin dhe mbeturinat të derdhen në një enë të përshtatshme.

  2. Shtrëngoni valvulën e zbrazjes.

  3. Nëse motori nuk ndizet, ndërroni filtrin e karburantit. Nëse ka humbje të fuqisë, ndërroni filtrin e karburantit.

Caterpillar Information System:

PL87 Pipelayer Machine Systems Drawbar - Remove and Install
Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540} Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540}
2012/02/06 The Buffers for the Exhaust Temperature Sensors Are Relocated on C175 Engines in 793F, 795F, and 797F Off-Highway Trucks {1408}
Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154} Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154}
428F, 432F, 434F and 444F Backhoe Loaders Additional Messages
C7.1 Engines For Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
C7.1 Engines For Caterpillar Built Machines Intake Manifold Air Pressure Is Low
428F, 432F, 434F and 444F Backhoe Loaders Safety Messages
C7.1 Engines For Caterpillar Built Machines Inlet Air Temperature Is High
C7.1 Engines For Caterpillar Built Machines Fuel Temperature Is High
C7.1 Engines For Caterpillar Built Machines Fuel Rail Pressure Problem
C7.1 Engines For Caterpillar Built Machines Fuel Consumption Is Excessive
773G and 775G Off-Highway Trucks Specifications
422F, 428F, 432F, 434F and 444F Backhoe Loaders Hydraulic Oil Sample - Obtain
2015/04/07 New VIMSpc Software Is Now Available On Certain Cat Product {0785, 7601}
PL83 and PL87 Pipelayers Machine Systems Refrigerant Accumulator - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Cable - Remove and Install
2011/09/14 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
PL83 and PL87 Pipelayers Machine Systems Boom - Remove and Install
PL87 Pipelayer Machine Systems Cooler Bypass Valve - Remove and Install
C9.3 Engines for Caterpillar Built Machines Mounting Straps
C9.3 Engines for Caterpillar Built Machines Mounting Straps
PL83 and PL87 Pipelayers Machine Systems Boom Sheave Block (Lower) - Disassemble
2011/09/12 An Improved Fan Shroud Assembly Is Now Used on Certain Off-Highway Trucks {1356}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.