Alternator Mounting
Show/hide table
Illustration 1 | g02615816 |
Show/hide table
Specification for 246-5566 Alternator Mounting Gp and 167-9564 Alternator Mounting Gp     | |||
Item     | Qty     | Part     | Specification Description     |
-     | -     | -     | Maximum misalignment between 300-8570 Pulley As (3) and 167-9563 Pulley (1) is 0.4 degrees.     |
2     | -     | -     | Tighten the pulley retaining nut to 110 ± 10 N·m (81 ± 7 lb ft).     |
4     | -     | -     | Adjust the belt tension of the serpentine belt according to the 197-9087 Tension Chart .     |
5     | 1     | 235-2484 Lip Type Seal     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
197-9087 Belt Tension Chart
Show/hide table
Specification for 197-9087 Belt Tension Chart     | |||||||
Size of Belt     | Width of Belt     | Gauge Reading     | Gauge (Force)     | Belt Tension (Frequency) "Initial" (1)     |
Belt Tension (Frequency) "Used" (2) (3)     |
Gauge (Frequency)     | |
Belt Tension (Force) "Initial" (1) |
Belt Tension (Force) "Used" (2) (3) |
Basic Gauge Number     | Gauge Number     | ||||
8 - RIB POLY - RIB     |
27.82 mm (1.095 inch)     |
800 ± 22 N (180 ± 5 lb)     |
489 ± 44 N (110 ± 10 lb)     |
BT-33-109     | 98 ± 10 HZ     | 76 ± 8 HZ     | Clavis Type 14     |
Do not use the belt tension chart for belts with tensioners that are spring loaded.     | |||||||
Measure the tension of the belt that is farthest from the engine.     |
Show/hide table
( 1 ) | Belt tension "lnitial" is for a new belt. |
( 2 ) | Belt tension "Used" is for a belt that has operated for 30 minutes or more of operation at the rated speed. |
( 3 ) | If a belt falls below the "Used" belt tension, the belt should be tightened again to the high side of the "Used" belt tension. |
Caterpillar Information System:
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Electric Starting Motor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankcase Breather
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Fan Drive
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Flywheel Housing
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Aftercooler Coolant Temperature Sensor
SH-56B Felling Head Felling Head Cutoff System
C15 Generator Sets Sensors and Electrical Components
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Solenoid Valve (Differential Lock) - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train System Pressure - Release
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders Safety Messages
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Power Train Troubleshooting
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Monitoring System
2011/07/18 New Hose Assemblies and New Clips Improves the Hoist Line Group on 797B Off-Highway Trucks {5057}
Sound Attenuation for Certain Off-Highway Trucks{0116, 1801, 1806, 7076, 7261, 7329} Sound Attenuation for Certain Off-Highway Trucks{0116, 1801, 1806, 7076, 7261, 7329}
PL87 Pipelayer Power Train Priority Valve - Disassemble
2011/08/05 A New Torque Procedure is Used on the Bolts in the Circle Drive Group on Certain Motor Graders {5207}
SS-56 Felling Head Piston Motor (Disc Saw)
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Lines (Air Compressor)
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Twin Turbocharger
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Side mounted Turbocharger
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Top mounted Turbocharger
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Engine Oil Filter
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Cylinder Head