Flywheel Housing
Show/hide table
Illustration 1 | g02615656 |
Show/hide table
Specification for 167-9574 Flywheel Housing Gp     | |||
Item     | Qty     | Part     | Specification Description     |
Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free from oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign material.     | |||
1     | 8     | 1D-4574 Bolt     | Length of 1/2 inch diameter bolt is 152.4 mm (6.00 inch).     |
Torque to 135 ± 20 N·m (100 ± 15 lb ft). |
|||
2     | 1     | 1D-4597 Bolt     | Length of 5/8 inch diameter bolt is 165.1 mm (6.50 inch).     |
Torque to 270 ± 40 N·m (199 ± 30 lb ft). |
|||
3     | 7     | 0S-1595 Bolt     | Length of 1/2 inch diameter bolt is 31.75 mm (1.250 inch).     |
Torque to 135 ± 20 N·m (100 ± 15 lb ft). |
|||
4     | 1     | 259-4598 O-Ring Seal     | Lubricate the bore lightly with the lubricant that is being sealed.     |
5     | 2     | 5D-3954 Taperlock Stud     | Apply, black Loctite Gasket Maker on the nut end of the taperlock studs.     |
Torque to 110 ± 20 N·m (81 ± 15 lb ft). |
|||
6     | 12     | 5D-9514 Bolt     | Length of 5/8 inch diameter bolt is 158.75 mm (6.250 inch).     |
Torque to 270 ± 40 N·m (199 ± 30 lb ft). |
|||
7     | 2     | 5P-4626 Bolt     | Length of 5/8 inch diameter bolt is 266.7 mm (10.50 inch).     |
Torque to 270 ± 40 N·m (199 ± 30 lb ft). |
|||
8     | 1     | 3F-6808 Dowel     | The dowel must be flush with the top face of the housing.     |
D     | 2     | 3F-6795 Dowel     | Protrusion of the dowel is 3.5 ± 0.5 mm (0.14 ± 0.02 inch).     |
C     | 3     | 7N-2047 Dowel     | Protrusion of the dowel is 6.0 ± 0.5 mm (0.24 ± 0.02 inch).     |
Caterpillar Information System:
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Aftercooler Coolant Temperature Sensor
SH-56B Felling Head Felling Head Cutoff System
C15 Generator Sets Sensors and Electrical Components
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Solenoid Valve (Differential Lock) - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train System Pressure - Release
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders Safety Messages
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Power Train Troubleshooting
PL87 Pipelayer Power Train System Pressure - Release
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Visual Inspection
PL87 Pipelayer Power Train Transmission Oil Filter - Remove and Install
Cat® Detect Proximity Awareness Onboard System System Information Windows
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Fan Drive
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankcase Breather
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Electric Starting Motor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Alternator Mounting
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Monitoring System
2011/07/18 New Hose Assemblies and New Clips Improves the Hoist Line Group on 797B Off-Highway Trucks {5057}
Sound Attenuation for Certain Off-Highway Trucks{0116, 1801, 1806, 7076, 7261, 7329} Sound Attenuation for Certain Off-Highway Trucks{0116, 1801, 1806, 7076, 7261, 7329}
PL87 Pipelayer Power Train Priority Valve - Disassemble
2011/08/05 A New Torque Procedure is Used on the Bolts in the Circle Drive Group on Certain Motor Graders {5207}
SS-56 Felling Head Piston Motor (Disc Saw)
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Lines (Air Compressor)
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Twin Turbocharger