C7 Engines for Caterpillar Built Machines Caterpillar


Cylinder Block Cover Group

Usage:

525C 525


Illustration 1g02534498
Left side view of engine

Table 1
Specification for 229-8841 Cylinder Block Cover Gp 
Item  Qty  Part  Specification Description 
4Y-9652 Gasket  Install the gasket so that the bead is facing the cover.
Apply Loctite High Flex GM to the gasket surface that is on the cover. Spread the sealant uniformly on the face of the cover and around the bolt holes. The cover must be installed and tightened within10 minutes. 
222-5893 Cover As 
342-4977 Side Cover 
23  6V-2317 Bolt  Tighten bolt 1 through bolt 8 on each cover in a numerical sequence that is shown in Illustration 1 to standard torque.
Again, tighten bolt 1 through bolt 8 on each cover in a numerical sequence that is shown in Illustration 1 to standard torque. 
210-3321 Stud 
5C-7261 Nut 
7W-3872 Sleeve  Install the sleeve in six locations (1). Refer to Illustration 1 

Caterpillar Information System:

541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood - Remove and Install - Right Side Hood
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood - Remove and Install - Left Side Hood
Installing the 361-0444 Air Conditioner Installation Kit Installing the 361-0444 Air Conditioner Installation Kit
2014/07/24 New Turbocharger Coolant Lines for 797 and 797B Off-Highway Trucks {1052, 1052, 1380}
HF201B Felling Head Specifications
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Radiator Group - Remove and Install
CP76 and CS76 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Assemble
CP76 and CS76 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Disassemble
541 Series 2 and 552 Series 2 Track Feller Bunchers Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
777G Off-Highway Truck Machine Systems Brake Accumulator - Assemble
777G Off-Highway Truck Machine Systems Brake Accumulator - Disassemble
777F Off-Highway Truck Machine Systems Brake Accumulator - Remove and Install
C7 Engines for Caterpillar Built Machines Water Temperature Regulator
C7 Engines for Caterpillar Built Machines Inlet Manifold
795F AC Off-Highway Truck Hydraulic and Braking System Hydraulic Tank (Brake, Hoist, Steering)
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Install
563C and 573C Wheel Feller Bunchers Engine Supplement Clean Emissions Module - Remove and Install
2011/05/16 A New Gasket Is Used for the Water Lines on Certain C15 and C18 Machine Engines {1052, 1380}
797F and 797F XQ Off-Highway Truck Hydraulic Fan System Piston Motor (Hydraulic Fan) - Extra Retarding
C175-16 and C175-20 Engines for Off-Highway Trucks Gear Group (Front)
AS2302C Asphalt Screed Screed Plates
AS3301C Asphalt Screed Screed Plates
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.