Hood - Remove and Install - Left Side Hood
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Brackets     | 1     |
Show/hide table
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed. Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death. Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder. |
- Install Tooling (A) and a suitable lifting device onto hood (1) .
Show/hide table
Illustration 1 | g01133325 |
- Open door (2) .
Show/hide table
Illustration 2 | g01133339 |
- Disconnect harness assembly (5). Remove valve (4) in order to relieve the pressure on cylinder (3) .
Show/hide table
Illustration 3 | g01133350 |
- Remove pin (7). Secure cylinder (3) onto fuel tank (6) .
Show/hide table
Illustration 4 | g01133363 |
- Close door (2) and install a bolt in order to secure door (2). Remove bolts (7). Remove hood (1). The weight of hood (1) is approximately 180 kg (400 lb).
Show/hide table
Illustration 5 | g01133372 |
Installation Procedure
- Install hood (1) in the reverse order of removal.
Caterpillar Information System:
Installing the 361-0444 Air Conditioner Installation Kit Installing the 361-0444 Air Conditioner Installation Kit
2014/07/24 New Turbocharger Coolant Lines for 797 and 797B Off-Highway Trucks {1052, 1052, 1380}
HF201B Felling Head Specifications
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Radiator Group - Remove and Install
CP76 and CS76 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Assemble
CP76 and CS76 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Disassemble
541 Series 2 and 552 Series 2 Track Feller Bunchers Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
777G Off-Highway Truck Machine Systems Brake Accumulator - Assemble
777G Off-Highway Truck Machine Systems Brake Accumulator - Disassemble
777F Off-Highway Truck Machine Systems Brake Accumulator - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Machine Systems Air Conditioner - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Engine and Transmission - Separate
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood - Remove and Install - Right Side Hood
C7 Engines for Caterpillar Built Machines Cylinder Block Cover Group
C7 Engines for Caterpillar Built Machines Water Temperature Regulator
C7 Engines for Caterpillar Built Machines Inlet Manifold
795F AC Off-Highway Truck Hydraulic and Braking System Hydraulic Tank (Brake, Hoist, Steering)
C9.3 Engines for Caterpillar Built Machines Compression Brake - Disassemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly
C9.3 Engines for Caterpillar Built Machines Compression Brake - Install
563C and 573C Wheel Feller Bunchers Engine Supplement Clean Emissions Module - Remove and Install
2011/05/16 A New Gasket Is Used for the Water Lines on Certain C15 and C18 Machine Engines {1052, 1380}
797F and 797F XQ Off-Highway Truck Hydraulic Fan System Piston Motor (Hydraulic Fan) - Extra Retarding
C175-16 and C175-20 Engines for Off-Highway Trucks Gear Group (Front)