Hood Tilt Cylinder - Remove and Install
Start By:
- Release the hydraulic system pressure.
- Raise the clamshell hood.
Show/hide table
Illustration 1 g02415297 - Disconnect hose assemblies (1), remove pins (2), and remove hood tilt cylinder (3).
- Repeat step one for the opposite side.
- Install hood tilt cylinder (3) in the reverse order of the removal procedure.
Caterpillar Information System:
770G and 772G OEM Off-Highway Truck Final Drive
C15 and C18 Petroleum Generator Sets Engine Valve Lash - Check
2011/03/29 An Improved Fan Motor is Available For Certain Articulated Trucks {1386}
Oval Track Roller Disassembly and Assembly Procedures {4180} Oval Track Roller Disassembly and Assembly Procedures {4180}
AS3301C Asphalt Screed Screed Heating
Replacement Of 6U-1416 Brake Valve Gp And 7U-4769 Brake Valve Gp {5481} Replacement Of 6U-1416 Brake Valve Gp And 7U-4769 Brake Valve Gp {5481}
Procedure To Strengthen The Transmission Guard Mounting Points On Certain Articulated Trucks{3030} Procedure To Strengthen The Transmission Guard Mounting Points On Certain Articulated Trucks{3030}
2011/11/11 Improved Clips for the Fumes Disposal Group are Available on Certain 777F Off-Highway Trucks {1317}
2011/04/06 Improved Crankcase Breather Assemblies Are Used on Certain Machines Equipped with C7 Engines {1107, 1317}
C6.6 Industrial Engine Exhaust Cooler (NRS) - Remove
C6.6 Industrial Engine Exhaust Cooler (NRS) - Install
C7.1 Engines For Caterpillar Built Machines System Overview
770G and 772G OEM Off-Highway Truck Power Train Electrical System
Cat® Grade Control Cross Slope for Motor Graders Full Sensor - Calibrate
583T Pipelayer Hydraulic System Hydraulic Tank and Filter
770G and 772G Off-Highway Truck (OEM) Hydraulic and Braking System Hydraulic System
770G and 772G OEM Off-Highway Truck Power Train Hydraulic System
770G and 772G OEM Off-Highway Truck Power Train Hydraulic System
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Seat - Remove and Install
2011/02/08 New Product Link Cellular Is Released for All Cat Products {7606}
770G and 772G OEM Off-Highway Truck General Information
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Hydraulic System Axle (Steering Positive Stop) - Test and Adjust
Cat® Grade Control Cross Slope for Motor Graders Bank Valve (Grade Control) - Calibrate
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561} Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}