Piston Motor (Power Train) - Remove and Install
Removal Procedure
Start By:
- Remove the cab.
- Remove the front drive shaft.
Show/hide table
 |
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin. Be sure that the engine and components are cool enough to touch with your bare hand prior to performing any service work. |
 |
- Disconnect hose assemblies (1) and (2). Disconnect harness assembly (3) .
Show/hide table
 | |
| Illustration 1 | g02122493 |
- Attach a suitable lifting device to piston motor (4). The weight of piston motor (4) is approximately 85 kg (187 lb).
Show/hide table
 | |
| Illustration 2 | g02122573 |
- Remove bolts (5) .
Show/hide table
 | |
| Illustration 3 | g02122581 |
- Lower piston motor (4) to the ground.
Show/hide table
 | |
| Illustration 4 | g02122613 |
Installation Procedure
- Install piston motor (4) in the reverse order of the removal.
Caterpillar Information System:
2010/03/12 New Auger Half Segments and Auger Quarter Segments Are Now Used on Certain Asphalt Pavers {6631}
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System Electrical Output Components
584 and 584HD Forwarders Machine Systems Gate - Remove and Install
2010/05/04 Updated Software for the Brake ECM is Now Available for the 797 and 797B Off Highway Truck {7620}
2010/04/21 A Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver is Available {1265, 1269}
Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver{1265, 1269} Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver{1265, 1269}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System Steering System Has Active Diagnostic Code
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Oil Level Sensor
14M3 Motor Grader Machine Systems Diverter Valve (Hydraulic Fan)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Steering Direction Is Opposite of Expected Direction
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold Shield
797F Off-Highway Truck Power Train Oil Filter and Base (Differential) - Remove and Install
The Transmission Oil Must be Changed Before Replacing any Transmission Solenoids{3030} The Transmission Oil Must be Changed Before Replacing any Transmission Solenoids{3030}
AP555E and BG555E Asphalt Pavers Machine Systems Pressure Limiter Valve (Tamper Pump) - Test and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Drive Chain (Auger) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Chain (Drag) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Speed (Auger) - Check
AP555E and BG555E Asphalt Pavers Machine Systems Piston Pump Flow (Vibratory) - Test
AP555E and BG555E Asphalt Pavers Machine Systems Relief Valve (Charge, Auger Conveyor and Drag Conveyor) - Test and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Relief Valve (Main, Auger Conveyor and Drag Conveyor) - Test and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Piston Pump Neutral (Auger Conveyor and Drag Conveyor) - Test and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Piston Motor Case Drain Flow (Auger Conveyor and Drag Conveyor) - Test