2010/04/21 Caterpillar


A Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver is Available {1265, 1269}

Usage:

AP-300 B2Y
Asphalt Paver:
AP300 (S/N: B2Y1-UP)

ReferenceSpecial Instruction, REHS4787, "Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver"

This Special Instruction provides information that is required in order to replace the former 309-8926 Lever Gp with the improved 339-1670 Lever Gp. The improved lever group has a stronger throttle cable that provides a better connection between the throttle control lever and the throttle.

The effectivity and the adaptability of the improved lever group are listed in Table 1.

Table 1
Machine Effectivity and Adaptability    
Sales Model     Adaptability     Effectivity    
AP-300     S/N:B2Y1-106,108-245     S/N:B2Y246-UP    

The Special Instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).

Caterpillar Information System:

Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver{1265, 1269} Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver{1265, 1269}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System Steering System Has Active Diagnostic Code
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Oil Level Sensor
14M3 Motor Grader Machine Systems Diverter Valve (Hydraulic Fan)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Steering Direction Is Opposite of Expected Direction
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold Shield
349F and 352F Excavators Fuel Tank Shutoff and Drain Control
C175-16 Locomotive Engine Temperature Sensor - Engine Coolant
C175-16 Locomotive Engine Temperature Sensor - Exhaust Temperature
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil Accumulator)
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System Symptom Troubleshooting
2010/05/04 Updated Software for the Brake ECM is Now Available for the 797 and 797B Off Highway Truck {7620}
584 and 584HD Forwarders Machine Systems Gate - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System Electrical Output Components
2010/03/12 New Auger Half Segments and Auger Quarter Segments Are Now Used on Certain Asphalt Pavers {6631}
584 and 584HD Forwarders Power Train Piston Motor (Power Train) - Remove and Install
797F Off-Highway Truck Power Train Oil Filter and Base (Differential) - Remove and Install
The Transmission Oil Must be Changed Before Replacing any Transmission Solenoids{3030} The Transmission Oil Must be Changed Before Replacing any Transmission Solenoids{3030}
AP555E and BG555E Asphalt Pavers Machine Systems Pressure Limiter Valve (Tamper Pump) - Test and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Drive Chain (Auger) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Chain (Drag) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Speed (Auger) - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.