Steering System Has Active Diagnostic Code
Immediate safe shutdown required
The event code E192 indicates that the steering system is experiencing one or more diagnostics on steering related components.
Show/hide table
| Diagnostic Codes That Could Cause the E192 to Trigger | |
| CID 0262 | FMI 3 and 4 (Only on Implement ECM 2) |
| CID 0596 - FMI 9 | (Only on Implement ECM 2) |
| CID 2200 | FMI 0, 1, 2, 3, 4, 8, and 14 |
| CID 2201 | FMI 0, 1, 2, 3, 4, 8, and 14 |
| CID 2650 | FMI 3, 5, and 6 (Only on Implement ECM 2) |
| CID 2828 | FMI 3, 4, and 14 (Only on Implement ECM 2) |
| CID 2829 | FMI 3, 4, and 14 (Only on Implement ECM 2) |
| CID 2202 | FMI 9 and 12 (Only on Implement ECM 2) |
| CID 0296 - FMI 12 | (Only on Implement ECM 2) |
| CID 0590 - FMI 14 | In combination with CID 0247-9 and CID 0248-14 or CID 0248-9 |
| CID 0041 | FMI 3 and 4 (Either ECM) |
| CID 2199 | FMI 3, 4, and 8 (Only on Transmission/Chassis ECM) |
| CID 1482 | FMI 3 and 4 (Only on Transmission/Chassis ECM) |
| CID 0420 | FMI 3, 5, and 6 (Only on Transmission/Chassis ECM) |
| CID 1471 | FMI 2, 3, 4, 8, 14 (Either ECM) |
| CID 1472 | FMI 2, 3, 4, 8, 14 (Either ECM) |
| CID 1473 | FMI 2, 3, 4, 8, 14 (Either ECM) |
| CID 1674 | FMI 3, 4, and 5 (Only on Transmission/Chassis ECM) |
| CID 2175 | FMI 3, 5, and 6 (Only on Transmission/Chassis ECM) |
| CID 2176 | FMI 3, 5, and 6 (Only on Transmission/Chassis ECM) |
| CID 0585 CID 0673 CID 0674 CID 0675 |
FMI 2 (Only on Transmission/Chassis ECM) |
| CID 0596 - FMI 12 | (Only on Transmission/Chassis ECM) |
Note: Primary Steering ECM is the Implement ECM 2 (MID 145)
Note: Secondary Steering functions are on the Trans/Chassis ECM (MID 27)
When a E192 is triggered in combination with diagnostic codes, troubleshoot with the following flowchart:
Show/hide table
 | |
| Illustration 1 | g02122234 |
Show/hide table
 | |
| Illustration 2 | g02122235 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Oil Level Sensor
14M3 Motor Grader Machine Systems Diverter Valve (Hydraulic Fan)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Steering Direction Is Opposite of Expected Direction
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold Shield
349F and 352F Excavators Fuel Tank Shutoff and Drain Control
C175-16 Locomotive Engine Temperature Sensor - Engine Coolant
C175-16 Locomotive Engine Temperature Sensor - Exhaust Temperature
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil Accumulator)
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System Symptom Troubleshooting
IT38H Integrated Toolcarrier and 938H Wheel Loader Hood Tilt
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 1558 - FMI 09
Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver{1265, 1269} Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver{1265, 1269}
2010/04/21 A Procedure to Install an Improved Lever Group on a AP300 Asphalt Paver is Available {1265, 1269}
2010/05/04 Updated Software for the Brake ECM is Now Available for the 797 and 797B Off Highway Truck {7620}
584 and 584HD Forwarders Machine Systems Gate - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System Electrical Output Components
2010/03/12 New Auger Half Segments and Auger Quarter Segments Are Now Used on Certain Asphalt Pavers {6631}
584 and 584HD Forwarders Power Train Piston Motor (Power Train) - Remove and Install
797F Off-Highway Truck Power Train Oil Filter and Base (Differential) - Remove and Install
The Transmission Oil Must be Changed Before Replacing any Transmission Solenoids{3030} The Transmission Oil Must be Changed Before Replacing any Transmission Solenoids{3030}
AP555E and BG555E Asphalt Pavers Machine Systems Pressure Limiter Valve (Tamper Pump) - Test and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Drive Chain (Auger) - Check and Adjust
AP555E and BG555E Asphalt Pavers Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust