Relief Valve (Torque Converter Inlet, Torque Converter Outlet) - Disassemble
开始:
- 拆下变矩器进口安全阀或变矩器出口安全阀。
- 从阀体 (1) 上拆下螺栓 (3) 和盖 (2)。
Show/hide table
图 2 g00517340 - 拆下 O 形密封圈 (4)。
Show/hide table
图 3 g00517344 Show/hide table
被弹簧力弹出的零件击中，会造成人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序，并使用所有建议的工具来释放弹簧力。
- 拆下螺栓 (5)、盖 (6) 和 O 形密封圈 (7)。
Show/hide table
图 4 g00517349 - 拆下弹簧 (8)、垫片 (9) 和滑阀组件 (10)。
Show/hide table
图 5 g00517352 Show/hide table被弹簧力弹出的零件击中，会造成人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序，并使用所有建议的工具来释放弹簧力。
- 从滑阀拆卸挡圈 (14)、护圈 (13)、弹簧 (12) 和提升阀 (11)。
Show/hide table
图 6 g00517353 - 拆下螺塞 (19)。
- 拆下螺塞 (18)。
- 拆下防尘盖 (15)、螺纹接头组件 (16) 和 O 形密封圈 (17)。
Show/hide table
| |
| 图 1 | g00517338 |
Show/hide table
|
|
被弹簧力弹出的零件击中，会造成人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具来释放弹簧力。 |
Caterpillar Information System:
2009/09/30 A New Front Suspension Frame Bearing Is Now Used {7050, 7203}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems Location of Electrical Components
793F Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) - Remove and Install
793F Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
12M Motor Grader Caterpillar Approved Work Tools
793F Off-Highway Truck Power Train Torque Converter - Remove and Install
C4.4 Industrial Engine Engine Stopping
793D Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Track Roller Frame - Lubricate
CD54 Paving Compactor Solenoid Valve (Chip Spreader) - Test
793F Off-Highway Truck Power Train Differential and Bevel Gear - Install
793F Off-Highway Truck Power Train Traction Control System (TCS) Wheel Speed Ring - Remove and Install
CD54 Paving Compactor Steering Wheel Encoder - Test
793F Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet, Torque Converter Outlet) - Assemble
C4.4 Industrial Engine Before Starting Engine
C4.4 Industrial Engine After Stopping Engine
C4.4 Industrial Engine System Pressure Release
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
Procedure to Install a Track Guide on the Front and Center Bogies on Certain AP655D Asphalt Pavers{4192} Procedure to Install a Track Guide on the Front and Center Bogies on Certain AP655D Asphalt Pavers{4192}
Procedure for Filtering Off-Highway Truck Hydraulic Oil{0680, 0738, 0768, 5050, 5056} Procedure for Filtering Off-Highway Truck Hydraulic Oil{0680, 0738, 0768, 5050, 5056}
793F Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove and Install
A Procedure to Replace the Relief Valve on the Hydraulic Generator for Certain AP655D Asphalt Pavers{4450, 5070, 5117} A Procedure to Replace the Relief Valve on the Hydraulic Generator for Certain AP655D Asphalt Pavers{4450, 5070, 5117}
2009/08/10 An Improved Adjustment Procedure for the Stop Lamp Switch is Now Available {1435, 4269}
Installation Instructions for Abrasion Sleeves and Edge Trim{1408, 5057, 7150, 7167} Installation Instructions for Abrasion Sleeves and Edge Trim{1408, 5057, 7150, 7167}