Relief Valve (Torque Converter Inlet, Torque Converter Outlet) - Assemble
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 5P-3413 | 管密封胶 | 1 |
- 安装 O 形密封圈 (17)、螺纹接头组件 (16) 和防尘盖 (15)。
注: 变矩器进口安全阀具有一个螺塞和 O 形密封圈，而非螺纹接头组件 (16) 和 O 形密封圈 (17)。
- 安装螺塞 (18)。
- 将工具 (A) 涂抹到螺塞 (19) 上。
- 安装螺塞 (19)。
Show/hide table
图 2 g00517352 Show/hide table
弹簧压缩零件如果安装不当，会伤害人体。
为避免可能伤害，遵照出版的装配程序，并穿上保护装备。
- 将提升阀 (11)、弹簧 (12)、护圈 (13) 和挡圈 (14) 安装到滑阀中。。
Show/hide table
图 3 g00517349 - 安装滑阀组件 (10)、垫片 (9) 和弹簧 (8)。
Show/hide table
图 4 g00517344 Show/hide table弹簧压缩零件如果安装不当，会伤害人体。
为避免可能伤害，遵照出版的装配程序，并穿上保护装备。
- 安装 O 形密封圈 (7)、盖 (6) 和螺栓 (5)。
Show/hide table
图 5 g00517340 - 安装 O 形密封圈 (4)。
Show/hide table
图 6 g00517338 Show/hide table弹簧压缩零件如果安装不当，会伤害人体。
为避免可能伤害，遵照出版的装配程序，并穿上保护装备。
- 将盖 (2) 和螺栓 (3) 安装到阀体 (1) 上。
Show/hide table
| |
| 图 1 | g00517353 |
注: 检查 O 形密封圈。 更新所有磨损或损坏的 O 形密封圈。
注: 安装 O 形密封圈时，用要密封的油液润滑 O 形密封圈。
结束:
- 安装变矩器进口安全阀或变矩器出口安全阀。
Caterpillar Information System:
CD54 Paving Compactor Steering Wheel Encoder - Test
793F Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet, Torque Converter Outlet) - Disassemble
2009/09/30 A New Front Suspension Frame Bearing Is Now Used {7050, 7203}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems Location of Electrical Components
793F Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) - Remove and Install
793F Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
12M Motor Grader Caterpillar Approved Work Tools
793F Off-Highway Truck Power Train Torque Converter - Remove and Install
C4.4 Industrial Engine Engine Stopping
793D Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Track Roller Frame - Lubricate
CD54 Paving Compactor Solenoid Valve (Chip Spreader) - Test
C4.4 Industrial Engine Before Starting Engine
C4.4 Industrial Engine After Stopping Engine
C4.4 Industrial Engine System Pressure Release
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
Procedure to Install a Track Guide on the Front and Center Bogies on Certain AP655D Asphalt Pavers{4192} Procedure to Install a Track Guide on the Front and Center Bogies on Certain AP655D Asphalt Pavers{4192}
Procedure for Filtering Off-Highway Truck Hydraulic Oil{0680, 0738, 0768, 5050, 5056} Procedure for Filtering Off-Highway Truck Hydraulic Oil{0680, 0738, 0768, 5050, 5056}
793F Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove and Install
A Procedure to Replace the Relief Valve on the Hydraulic Generator for Certain AP655D Asphalt Pavers{4450, 5070, 5117} A Procedure to Replace the Relief Valve on the Hydraulic Generator for Certain AP655D Asphalt Pavers{4450, 5070, 5117}
2009/08/10 An Improved Adjustment Procedure for the Stop Lamp Switch is Now Available {1435, 4269}
Installation Instructions for Abrasion Sleeves and Edge Trim{1408, 5057, 7150, 7167} Installation Instructions for Abrasion Sleeves and Edge Trim{1408, 5057, 7150, 7167}
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System Electrical Input Components
CD54 Paving Compactor Speed Sensor (Left Front Drum) - Test