Gear Pump (Transmission Charging and Scavenge) - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-0510     | 冲头总成     | 1     |
开始:
- 拆下齿轮泵。 请参阅拆解和装配, "齿轮泵(变速箱注油和回油)- 拆卸",了解正确的步骤。
- 从磁性滤网 (2) 上卸下三个螺栓 (1) 。
Show/hide table
图 1 | g00621178 |
- 从齿轮泵 (3) 上卸下磁性滤网 (2) 和 O 形密封圈。
- 从齿轮泵 (3) 上卸下两个螺栓 (4) 和垫圈。
Show/hide table
图 2 | g00621180 |
- 如图所示,定位齿轮泵 (3) 。
Show/hide table
图 3 | g00621181 |
- 从齿轮泵 (3) 上卸下两个 O 形密封圈 (5) 。
- 从齿轮泵 (3) 上卸下四个螺栓 (6) 、八个橡皮垫圈和四个钢垫圈。
- 从齿轮泵 (3) 上卸下泵歧管组件 (7) 和 O 形密封圈。
- 从泵歧管组件 (7) 上卸下两个定位销(未显示)。
- 从齿轮泵 (3) 上卸下机油泵体组件 (8) 和 O 形密封圈。
注: 此组件包括机油泵齿轮组件和机油泵齿轮。
Show/hide table
图 4 | g00621182 |
Show/hide table
图 5 | g00621183 |
- 为便于组装,标记两个机油泵齿轮组件 (10) 和机油泵齿轮 (11) 。 从机油泵齿轮组件 (10) 和机油泵齿轮组件 (12) 上卸下两个机油泵齿轮 (11) 。
- 将月牙键 (9) 从机油泵齿轮组件 (12) 上拆下。
- 将机油泵体组件 (8) 转过 180 度。 从机油泵体组件 (8) 上卸下机油泵齿轮组件 (10) 和机油泵齿轮组件 (12) 。
Show/hide table
图 6 | g00621184 |
- 为便于组装,标出机油泵齿轮组件 (10) 和机油泵齿轮组件 (12) 上两个机油泵齿轮 (13) 的位置。 从机油泵齿轮组件 (10) 和机油泵齿轮组件 (12) 上卸下两个机油泵齿轮 (13) 。
- 从机油泵齿轮组件及机油泵齿轮 (13) 底下卸下两个月牙键(未显示)。
- 使用工具 (A) 将两个轴承 (14) 从机油泵体组件 (8) 上拆下。
- 从泵盖组件 (17) 上卸下机油泵体组件 (15) 、四个定位销(未显示)和 O 形密封圈。
Show/hide table
图 7 | g00621189 |
- 使用工具 (A) 将两个轴承 (16) 从泵盖组件 (17) 上拆下。
Caterpillar Information System:
12K, 140K and 160K Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
CB54 and CB64 Asphalt Compactors Machine Systems Battery and Battery Cable - Separate and Connect
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
277C, 277C2, 287C, 287C2 and 297C Multi Terrain Loaders Machine Systems Undercarriage
3408E and 3412E Engines for Caterpillar Built Machines Engine Stalls at Low RPM
2009/02/23 Updated Bracket for the Hydraulic Lines {4304, 5057}
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1326 - FMI 02
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Engine Shutdown Is Intermittent
2009/01/26 K Series Bucket Tip Slag Retainers For High Temperature Applications are Available {6805}
EquipmentManager User Guide Manage Major Repair Tracking
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5014 - FMI 6
12K, 140K and 160K Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Battery - Remove and Install
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
12K, 140K and 160K Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge) - Install
C9 Engines for Motor Graders Engine Top Speed Is Not Obtained
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Remove - Rear
2008/12/29 A Standard Procedure For Measuring Cylinder Drift Has Been Published {7562}
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Install - Rear
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Disassemble - Rear
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Assemble - Rear
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Remove - Front
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Disassemble - Front