Gear Pump (Transmission Charging and Scavenge) - Remove
拆卸步骤
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 卸下软管 (1) 。
Show/hide table
图 1 | g00999458 |
- 断开软管组件 (2) 。
Show/hide table
图 2 | g00999459 |
- 拆下两个螺栓 (3) 。
- 断开软管 (4) 。 断开软管组件 (5) 。
- 卸下螺栓 (6) ,然后卸下磁性滤网 (7) 。
- 将适当的提升装置连接到齿轮泵 (8) 。
Show/hide table
图 3 | g00999461 |
- 拆下螺栓 (9) 。 卸下齿轮泵 (8) 。 齿轮泵 (8) 的重量约为 25 kg (55 lb)。
Caterpillar Information System:
CB54 and CB64 Asphalt Compactors Machine Systems Battery and Battery Cable - Separate and Connect
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
277C, 277C2, 287C, 287C2 and 297C Multi Terrain Loaders Machine Systems Undercarriage
3408E and 3412E Engines for Caterpillar Built Machines Engine Stalls at Low RPM
2009/02/23 Updated Bracket for the Hydraulic Lines {4304, 5057}
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1326 - FMI 02
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Engine Shutdown Is Intermittent
2009/01/26 K Series Bucket Tip Slag Retainers For High Temperature Applications are Available {6805}
EquipmentManager User Guide Manage Major Repair Tracking
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5014 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5014 - FMI 5
12K, 140K and 160K Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge) - Disassemble
12K, 140K and 160K Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Battery - Remove and Install
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
12K, 140K and 160K Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge) - Install
C9 Engines for Motor Graders Engine Top Speed Is Not Obtained
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Remove - Rear
2008/12/29 A Standard Procedure For Measuring Cylinder Drift Has Been Published {7562}
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Install - Rear
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Disassemble - Rear
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Assemble - Rear
CB54 and CB64 Asphalt Compactors Machine Systems Piston Motor (Drum Propel) - Remove - Front