CB54 and CB64 Asphalt Compactors Machine Systems Caterpillar

Separation Procedure

1. Open the engine enclosure. Turn the battery disconnect switch to the OFF position.

Show/hide table



Illustration 1	g01642223

2. Remove the bolts and plate (1) .

Show/hide table



Illustration 2	g01642224

3. Loosen clamps (2) .

4. Remove the bolts, clips (5), and harness assembly (4) .

5. Remove bolts (6) and plate assembly (3) .

Show/hide table



Illustration 3	g01642227

6. Remove the nut and harness assemblies (7) .

Show/hide table



Illustration 4	g01642228

7. Loosen the nut and disconnect negative cable assembly (13) .

8. Loosen the nut and disconnect positive cable assembly (8) .

9. Remove clamps (9) and (11) .

10. Place cable assemblies (10) out of the way.

11. Loosen the nuts and remove hold down bracket (12) .

12. Remove battery (14). Use two people to remove battery (14). The weight of battery (14) is approximately 27 kg (60 lb).

Connection Procedure

Show/hide table



Illustration 5	g01642228

1. Install battery (14). Use two people to install battery (14). The weight of battery (14) is approximately 27 kg (60 lb).

2. Install hold down bracket (12) and tighten the nuts.

3. Place cable assemblies (10) into position.

4. Install clamps (9) and (11) .

5. Connect positive cable assembly (8) and tighten the nut.

6. Connect negative cable assembly (13) and tighten the nut.

Show/hide table



Illustration 6	g01642227

7. Install harness assemblies (7) and the nut.

Show/hide table



Illustration 7	g01642224

8. Install plate assembly (3) and bolts (6) .

9. Install harness assembly (4), clips (5), and the bolts.

10. Tighten clamps (2) .

Show/hide table



Illustration 8	g01642223

11. Install plate (1) and the bolts.

12. Turn the battery disconnect switch to the ON position. Close the engine enclosure.