785D Off-Highway Truck Caterpillar


Frame and Body - Inspect

Usage:

785D MSY

------ WAARSCHUWING! ------

Bevestig de borgkabel van de laadbak aan het achterste sleeppunt als het nodig is om onder de machine te werken met de laadbak omhoog. Breng de pen van het achterste sleeppunt aan door het uiteinde van de borgkabel.

Nalaten om de laadbak goed vast te zetten kan persoonlijk letsel of de dood tot gevolg hebben.


Opm. Gebruik voor toegang tot de bovenkant van het achterchassis een draagbaar toegangssysteem (ladder, trap, liftje, of ander draagbaar toegangssysteem) dat geschikt is en voldoet aan lokale regelgeving.

  1. Parkeer de machine op een vlakke ondergrond en schakel de parkeerrem in.

  2. Breng de laadbak naar de hoogste stand en installeer de borgkabel aan het achterste sleeppunt. Raadpleeg de Bedienings- en onderhoudshandleiding, "Cable (Truck Body Retaining)" voor de juiste procedure.

  3. Stop de motor.


    Illustratie 1g01167539

  4. Reinig het chassis met een staalborstel of krabber. Inspecteer de laadbak. Raadpleeg uw Caterpillar dealer voor reparatieprocedures als het chassis beschadigd of versleten is.

  5. Reinig de laadbak met een staalborstel of krabber. Inspecteer de laadbak. Raadpleeg uw Caterpillar dealer voor reparatieprocedures als de laadbak beschadigd of versleten is.

Caterpillar Information System:

785D Off-Highway Truck Frame - Clean/Inspect
Procedure for Inspecting the Antenna of the TC900B and TC900C Radios{733T} Procedure for Inspecting the Antenna of the TC900B and TC900C Radios{733T}
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Gear Pump (Brake)
An Air Dryer is Available for the Air Compressor and the Governor Assembly {1803, 4285} An Air Dryer is Available for the Air Compressor and the Governor Assembly {1803, 4285}
AP600D Asphalt Paver Propel System Relief Valve (Charge) - Test and Adjust
2008/10/13 New Inspection Procedure for the Antenna of the TC900B and TC900C Radios {733T}
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Gear Pump (Brake Cooling)
2008/05/26 Improved Accessory Drives for the PTO are Used {1207}
Installation of Pivot Kit For Steering Columns{4310, 4338} Installation of Pivot Kit For Steering Columns{4310, 4338}
416E, 422E and 428E Backhoe Loaders Engine Crankcase Breather - Replace
AP655D Asphalt Paver Machine Systems Generator - Remove and Install - 35K
2008/06/30 A New Kit for the Fuel Transfer Pump is Now Used {1256, 1714}
785D Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
2008/06/30 A New Kit for the Fuel Transfer Pump is Now Used {1256, 1714}
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Gear Pump (Hoist)
2008/07/07 Correction to Systems Operation Testing and Adjusting , "Circuit Breaker" {1417}
2008/07/07 Correction to Systems Operation Testing and Adjusting , "General Information" {4300}
PL61 Pipelayer Machine Systems Window Wiper and Wiper Motor
2008/07/07 Correction to Systems Operation Testing and Adjusting , "Steering System (High Pressure Oil Circuit)" {4300}
2008/08/11 New Service Brake Lines for the Front and Rear Axles are Now Used {4257}
PL61 Pipelayer Power Train Systems Sprocket
PL61 Pipelayer Power Train Systems Track Roller Frame
2008/05/26 The Accessory Drive Groups and the Front Gear Groups Have Been Improved in the Rear Engine for 797 and 797B Off-Highway Trucks {1207}
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Truck Body Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.