793F and 793F CMD Off-Highway Truck Hydraulic System Caterpillar


Hoist Cylinder

Usage:

793F D3T



Illustration 1g03675027

Table 1
Specification for 295-5708 Hoist Cylinder Gp    
Item     Qty     Part     Specification description    
1     8     173-9779 Bolt     Before tightening, lubricate threads.
Torque to 900 ± 100 N·m (664 ± 74 lb ft).    
A     1     121-2074 Cylinder As     Bore is
323.90 ± 0.10 mm (12.752 ± 0.004 inch).    
B     1     301-3154 Hydraulic Cylinder     Bore is
254.04 mm (10.002 inch).    
C     1     271-7547 Hydraulic Cylinder Rod As     Diameter is
196.800 ± 0.038 mm (7.7480 ± 0.0015 inch).    
2     16     8T-0668 Bolt     Torque to
900 ± 100 N·m (664 ± 74 lb ft).    
3     1     332-7045 U-Cup Seal     Lubricate the sealing lip lightly with lubricant that is being sealed.    
4     1     121-4172 Wiper Seal     Lubricate the sealing lip lightly with lubricant that is being sealed.    
5     1     121-4171 Wiper Seal     Lubricate the sealing lip lightly with lubricant that is being sealed.    
6     1     332-7046 U-Cup Seal     Lubricate the sealing lip lightly with lubricant that is being sealed.    
7     1     157-0210 Head     Torque to
1800 ± 300 N·m (1328 ± 221 lb ft)
Apply Loctite 609 red to internal threads before assembly.    

Caterpillar Information System:

414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Tilt Cylinder - Remove and Install
2008/05/05 The Margin Pressure Adjustment Plug for the Pump Control Valve Has Been Improved {5070, 5455}
CB-434D, CB-534D and CB-564D Asphalt Compactors Propel Speed Range Control - Test
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Lift Cylinder - Remove and Install
793F and 793F CMD Off-Highway Truck Air System Solenoid Valve (Air Start)
773F and 775F Off-Highway Truck Hoist and Brake Tank Oil Sample - Obtain
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Lift Arms - Install
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Lift Arms - Remove
2008/05/19 Improved Drive Shaft Groups Increase Loading Capability {1017, 1157, 1207, 3108, 3253, 5070, 5073}
793F and 793F CMD Off-Highway Truck Air System Air Compressor Governor - Test and Adjust
793F and 793F CMD Off-Highway Truck Air System Air Dryer - Check
793F and 793F CMD Off-Highway Truck Air System Air Compressor - Check
416E, 420E and 430E Backhoe Loaders Machine Systems Bucket - Remove and Install
2008/05/05 New Software for the Caterpillar Monitoring System is Now Available {7490, 7620}
2008/07/07 Correction to Systems Operation Testing and Adjusting , "Brake Control Valve (Parking)" {4282}
2008/07/07 Correction to Systems Operation Testing and Adjusting , "Brake Release System" {4250, 4284}
2008/07/07 Correction to Systems Operation Testing and Adjusting , "Service and Parking Brake System" {4251, 4267}
R2900G Load Haul Dump Braking System Sequence Valve (Brake Release)
2008/07/07 Correction to Systems Operation Testing and Adjusting , "Sequence Valve (Brake Release)" {4282}
2008/06/16 Correction to Operation and Maintenance Manual , "Braking System - Test" {4250, 4251, 4267}
PL61 Pipelayer Machine Systems Load Control Valve (Dead Engine Lower)
PL61 Pipelayer Machine Systems Shutoff Valve (Implement Lockout)
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Bucket Positioner Control - Remove and Install
795F AC Off-Highway Truck Air System Check Valve (Air Tank)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.