Seat
Make the seat adjustments when the operator is sitting against the back of the seat. In order to reduce fatigue, periodically readjust the seat and the backrest for additional comfort.
Show/hide table
 | |
| Illustration 1 | g01467827 |
Show/hide table
| Lumbar Support Control Knob (1) - In order to change support to the lower back, operate lumbar support control knob clockwise or counterclockwise. |
Show/hide table
| Seat Recline Lever (2) - In order to move the back of the seat to the desired position, pull up seat recline lever. Release the lever in order to lock the back of the seat into position. |
Show/hide table
| Seat Cushion Tilt Lever (3) - In order to adjust the seat cushion to the desired angle and height, push down on front seat cushion tilt lever. Pull up on the lever in order to lock the seat cushion. |
Show/hide table
| Suspension Damping Knob (4) - Turn suspension damping knob in order to change the stiffness of the suspension. Turn suspension damping knob until the weight setting on the dial is the same as the operators weight. Do not turn the knob past the maximum weight setting or past the minimum weight setting. |
Show/hide table
| Fore and Aft Lever (5) - Pull up fore and aft lever. Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position. |
Show/hide table
| Swivel Adjustment Lever (6) - In order to rotate the seat turn the swivel adjustment lever counterclockwise until it locks into the released position and rotate the seat on its base. To lock the seat into position, pull and turn the swivel adjustment lever clockwise and the seat will lock into one of two positions 180 degrees apart. |
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Trucks Engine Shutdown Switch
2008/03/03 A New Throttle Position Sensor is Now Used {1913}
795F AC and 795F AC XQ Off-Highway Trucks Battery Disconnect Switch
12K, 140K and 160K Motor Graders Air Dryer Desiccant - Replace
2008/05/19 A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
120K Motor Grader Cooling System Pressure Cap - Clean/Replace
120K Motor Grader Cooling System Coolant Extender (ELC) - Add
2008/03/03 A New Check Valve for the Spray Bars is Now Used on Utility Compactors {6609}
CD54 Paving Compactor Operation Information
325D Forest Machine Machine System Specifications Boom - Log Loader
2008/07/21 New Radiator Header Tank Hosing is Now Used {1353}
AP-1000D and BG-260D Asphalt Pavers Propel System Final Drive
PS-150B and PS-200B Paving Compactors Maintenance Interval Schedule
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0621 - FMI 04
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0622 - FMI 03
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0622 - FMI 04
12K, 140K and 160K Motor Graders Cooling System Coolant Sample (Level 1) - Obtain
12K, 140K and 160K Motor Graders Cooling System Coolant Level - Check
120K Motor Grader Crankshaft Vibration Damper - Inspect
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Solenoid and Relief Valve (Steering)
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Accumulator (Steering)
793F AC Off-Highway Truck Hydraulic Fan and Steering System Oil Cooler (Hydraulic Fan, Steering)
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Steering Control Valve
Correction for Capacity of the Hydraulic Tank{5056} Correction for Capacity of the Hydraulic Tank{5056}