Electric Starting Motor - Remove and Install
Removal Procedure
Start By:
- Remove the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
- Turn the disconnect switch to the OFF position.
- Disconnect cable assemblies (2) from electric starting motor (1) .
Show/hide table
 | |
| Illustration 1 | g01454216 |
- Remove bolts (3) and electric starting motor (1) from the engine.
Show/hide table
 | |
| Illustration 2 | g01454217 |
Installation Procedure
- Install electric starting motor (1) and bolts (3) .
Show/hide table
| | |
| Illustration 3 | g01454217 |
- Connect cable assemblies (2) to electric starting motor (1) .
Show/hide table
| | |
| Illustration 4 | g01454216 |
- Turn the disconnect switch to the ON position.
End By: Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Caterpillar Information System:
CB22, CB24, CB32 and CC24 Vibratory Compactor Alternator - Remove and Install
CB22, CB24, CB32 and CC24 Vibratory Compactor Air Cleaner - Remove and Install
AP600D and BG600D Asphalt Pavers Machine Systems Hydraulic Cylinder (Steering)
CW34 Pneumatic Compactor Battery or Battery Cable - Inspect/Replace
AP500E and BG500E Asphalt Pavers Machine Systems Metering Pump (Steering)
AP600D and BG600D Asphalt Pavers Fuel System Secondary Filter - Replace
AP600D and BG600D Asphalt Pavers Fuel System Primary Filter - Clean/Inspect/Replace
AP600D and BG600D Asphalt Pavers Fuel System Filter (Washdown) - Clean
AP600D and BG600D Asphalt Pavers Fuel System - Prime
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Flash Program
C27 and C32 Engines for Caterpillar Built Machines Switch Circuits - Test
CB22, CB24, CB32 and CC24 Vibratory Compactor Battery - Remove and Install
AS2252C Asphalt Screed Vibratory Group (Main) - Remove
AS2252C Asphalt Screed Vibratory Group (Main) - Install
AS2252C Asphalt Screed Vibratory Group (Extender) - Remove
AS2252C Asphalt Screed Vibratory Group (Extender) - Install
AS2252C Asphalt Screed Vibratory Group - Disassemble
AS2252C Asphalt Screed Vibratory Group - Assemble
CB22, CB24, CB32 and CC24 Vibratory Compactor Engine Enclosure (Hood) - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
416E, 420E and 430E Backhoe Loaders Transmission (Autoshift) General Information
CB22, CB24, CB32 and CC24 Vibratory Compactor Water Separator (Fuel Priming Pump and Primary Fuel Filter) - Remove
CB22, CB24, CB32 and CC24 Vibratory Compactor Water Separator (Fuel Priming Pump and Primary Fuel Filter) - Install