Pump Mounting (Hydrostatic)
Show/hide table
 | |
| Illustration 1 | g03746558 |
Typical example | |
Show/hide table
| Specification for 261-5660 Hydrostatic Pump and Mounting Gp, and 218-5719 Hydrostatic Pump and Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 252-9167 Bolt | Slide coupling hub assembly (2) over pump shaft until hub assembly (2) stops. Tighten the bolts (1) in sequence to 33 ± 7 N·m (292 ± 62 lb in) and repeat the tightening sequence. |
| 2 | 1 | 263-4997 Coupling Hub As | |
| A | - | - | Distance between front of the coupling hub assembly (2) to the face of the piston pump is 82.0 mm (3.23 inch). |
Show/hide table
 | |
| Illustration 2 | g03746576 |
Piston pump group Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 3 | 2 | 9S-8002 O-Ring Plug | Torque to 15.00 ± 0.75 N·m (132.76 ± 6.64 lb in). |
| 4 | 2 | 9X-6606 Hex Nut | Torque to 30.0 ± 1.5 N·m (265.5 ± 13.3 lb in). |
| 5 | 1 | - | Torque to 50.0 ± 2.5 N·m (36.9 ± 1.8 lb ft). |
| 6 | 8 | 8T-0267 Bolt | Torque to 10.40 ± 0.52 N·m (92.05 ± 4.60 lb in). |
| 7 | 2 | 9T-4817 Nut | Torque to 22.0 ± 1.1 N·m (194.7 ± 9.7 lb in). |
| 8 | 1 | 204-1459 Relief Valve Gp | Torque to 70.0 ± 3.5 N·m (51.6 ± 2.6 lb ft). |
| 9 | 4 | 386-6601 Relief Valve Gp | Torque to 250 ± 10 N·m (184 ± 7 lb ft). |
| 10 | 8 | 8T-0273 Bolt | Torque to 130 ± 5 N·m (96 ± 4 lb ft). |
Caterpillar Information System:
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Piston Pump
AP600D and BG600D Asphalt Pavers Capacities (Refill)
24M Motor Grader Machine Systems Swivel - Install
24M Motor Grader Machine Systems Swivel - Remove
450E Backhoe Loader Features
785D OEM Off-Highway Truck Steering System Oil Filter - Replace
450E Backhoe Loader General Information
PM-201 Cold Planer Machine Systems Rotor Drive Clutch - Install
PM-201 Cold Planer Machine Systems Rotor Drive Clutch - Remove
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Gear Pump
PM-201 Cold Planer Machine Systems Drive Shaft (Rotor) - Remove and Install
PM-201 Cold Planer Machine Systems Conveyor Idler (First Stage) - Remove and Install
2008/05/12 A New Procedure is Available to Install the New Heater Elements on Asphalt Screeds {6643, 664E}
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Control Manifold and Solenoid (Work Tool Positioner)
AP500E and BG500E Asphalt Pavers Braking System - Test
3500B Locomotive Engines Belt Tension Chart
2007/12/24 Oil Suction Tube {1302}
PM-201 Cold Planer Machine Systems Hydraulic Oil Tank (Rotor Clutch) - Remove and Install
450E Backhoe Loader Electrical Input Components
450E Backhoe Loader Location of Electrical Components
AS4251C Asphalt Paver Electric Heat System
994F Wheel Loader Additional Messages
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Gear Motor (Fan) - Demand
2008/01/28 A New Clamp is Available for the Turbocharger Turbine Housing {1052, 1053}