Gear Motor (Fan) - Demand
Show/hide table
 | |
| Illustration 1 | g01443838 |
(1) Torque for the nut ... 6.1 N·m (4.50 lb ft)
(2) Torque for the solenoid valve ... 48 ± 2 N·m (35.4 ± 1.5 lb ft)
(3) Torque for the speed sensor ... 15 N·m (11.1 lb ft)
(4) 261-6121 Hydraulic Fan Motor and Mounting Gp
- Direction of rotation ... Clockwise
- Displacement ... 13 cc (0.79 in3)
- Minimum rotation at a pressure of 25000 kPa (3626.0 psi) ... 500 RPM
- Maximum rotation at a pressure of 25000 kPa (3626.0 psi) ... 3500 RPM
- Displacement ... 13 cc (0.79 in3)
(5) Torque for the temperature sensor ... 20 ± 3 N·m (14.8 ± 2.2 lb ft)
(6) Torque for the four bolts ... 45 ± 3 N·m (33 ± 2 lb ft)
(7) Torque for the bolt ... 30 ± 7 N·m (22 ± 5 lb ft)
Caterpillar Information System:
994F Wheel Loader Additional Messages
AS4251C Asphalt Paver Electric Heat System
450E Backhoe Loader Location of Electrical Components
450E Backhoe Loader Electrical Input Components
PM-201 Cold Planer Machine Systems Hydraulic Oil Tank (Rotor Clutch) - Remove and Install
2007/12/24 Oil Suction Tube {1302}
3500B Locomotive Engines Belt Tension Chart
AP500E and BG500E Asphalt Pavers Braking System - Test
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Control Manifold and Solenoid (Work Tool Positioner)
2008/05/12 A New Procedure is Available to Install the New Heater Elements on Asphalt Screeds {6643, 664E}
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Pump Mounting (Hydrostatic)
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Piston Pump
2008/01/28 A New Clamp is Available for the Turbocharger Turbine Housing {1052, 1053}
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Machine Frame and Mounting
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Machine Frame and Mounting
2008/09/08 A New Main Steering Control Valve Is Now Used on Large Wheel Loaders and Large Wheel Dozers with the Standard and Secondary Steering {4307, 4307}
414E, 416E, 420E and 430E Backhoe Loaders Electronic Control Module
2008/03/24 A Procedure is Available to Install New Software for Machine Control on Cold Planers {7620}
2008/03/24 A New Procedure is Available to Update Software for the Control of the Rotor on Cold Planers {7620}
2010/12/14 A New Zero Degree Lean Bar Is Now Available on Certain Motor Graders {4305, 4313, 5225}
247B2 and 257B2 Multi Terrain Loaders Machine Systems Piston Motor
2007/12/24 Improved Drive Shafts are Available {3253}
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Control Manifold (Pump Control Torque Limiter)
785D OEM Off-Highway Truck Torque Converter Oil Filter - Replace