Improved Drive Shafts are Available {3253}
- Backhoe Loader:
- 414E (S/N: ELB1-UP)
- 416E (S/N: CBD1-UP; SHA1-UP)
- 420E (S/N: HLS1-UP; KMW1-UP)
- 422E (S/N: HBE1-UP)
- 428E (S/N: SNL1-UP)
- 430E (S/N: DDT1-UP; EAT1-UP)
- 430E (S/N: BXE1-UP)
- 434E (S/N: FSH1-UP)
- 442E (S/N: GKZ1-UP)
Description of Change: Improved drive shafts are available for certain backhoe loaders. The new drive shafts will improve reliability and serviceability.
Adaptable To: The improved drive shafts are adaptable to the following machines.
Backhoe Loader
- 414E (S/N: ELB1-765)
- 416E (S/N: CBD1-2577)
- 416E (S/N: SHA1-3046)
- 420E (S/N: HLS1-4886)
- 420E (S/N: KMW1-1924)
- 422E (S/N: HBE1-1395)
- 428E (S/N: SNL1-1986)
- 430E (S/N: DDT1-610)
- 430E (S/N: EAT1-1005)
- 432E (S/N: BXE1-2015)
- 434E (S/N: FSH1-795)
- 442E (S/N: GKZ1-503)
- 414E (S/N: ELB766-UP)
- 416E (S/N: CBD2578-UP)
- 416E (S/N: SHA3047-UP)
- 420E (S/N: HLS4887-UP)
- 420E (S/N: KMW1925-UP)
- 422E (S/N: HBE1396-UP)
- 428E (S/N: SNL1987-UP)
- 430E (S/N: DDT611-UP)
- 430E (S/N: EAT1006-UP)
- 432E (S/N: BXE2016-UP)
- 434E (S/N: FSH796-UP)
- 442E (S/N: GKZ504-UP)
Show/hide table
Description     | Former Part Number     | New Part Number     |
Front drive shaft Manual transmission AWD     |
249-5276     | 304-3266     |
Front drive shaft Power shift transmission AWD     |
233-6721     | 304-3262     |
Front drive shaft Power shift transmission EST     |
233-6721     | 304-3263     |
Rear drive shaft All models     |
216-4473     | 304-3269     |
Caterpillar Information System:
247B2 and 257B2 Multi Terrain Loaders Machine Systems Piston Motor
2010/12/14 A New Zero Degree Lean Bar Is Now Available on Certain Motor Graders {4305, 4313, 5225}
2008/03/24 A New Procedure is Available to Update Software for the Control of the Rotor on Cold Planers {7620}
2008/03/24 A Procedure is Available to Install New Software for Machine Control on Cold Planers {7620}
414E, 416E, 420E and 430E Backhoe Loaders Electronic Control Module
2008/09/08 A New Main Steering Control Valve Is Now Used on Large Wheel Loaders and Large Wheel Dozers with the Standard and Secondary Steering {4307, 4307}
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Machine Frame and Mounting
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Machine Frame and Mounting
2008/01/28 A New Clamp is Available for the Turbocharger Turbine Housing {1052, 1053}
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Gear Motor (Fan) - Demand
994F Wheel Loader Additional Messages
AS4251C Asphalt Paver Electric Heat System
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Control Manifold (Pump Control Torque Limiter)
785D OEM Off-Highway Truck Torque Converter Oil Filter - Replace
2008/02/04 A New Parking Brake Pressure Switch is Now Used {1408, 1435, 1435}
785D OEM Off-Highway Truck Torque Converter Outlet Screen - Replace
785D Off-Highway Truck Transmission Breather - Clean
785D OEM Off-Highway Truck Transmission Magnetic Screen - Clean
Topcon® System Five Additional Messages
C7 Petroleum Engines Flywheel
Solenoid For The Centershift On Motor Graders{5479} Solenoid For The Centershift On Motor Graders{5479}
Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608, 5634, 6635} Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608, 5634, 6635}
C7 Engines for Caterpillar Built Machines Flywheel
PM-201 Cold Planer Machine Systems Control Valve (Center Auxiliary Manifold) - Disassemble