Control Manifold (Pump Control Torque Limiter)
Show/hide table
 | |
| Illustration 1 | g01444022 |
(1) Orient the solenoid (1) according to Illustration 1.
(2) Tighten the cartridge assembly to the following torque. ... 35 ± 3 N·m (26 ± 2 lb ft)
(3) Tighten the solenoid to the following torque. ... 50 ± 7 N·m (37 ± 5 lb ft)
(4) Tighten the screen to the following torque. ... 20 ± 4 N·m (15 ± 3 lb ft)
285-5730 Solenoid Valve Group
Show/hide table
 | |
| Illustration 2 | g01444023 |
Coil
- Nominal voltage ... 24 VDC
- Nominal resistance at 25 °C (77 °F) ... 5 ± .3 ohms
Caterpillar Information System:
2007/12/24 Improved Drive Shafts are Available {3253}
247B2 and 257B2 Multi Terrain Loaders Machine Systems Piston Motor
2010/12/14 A New Zero Degree Lean Bar Is Now Available on Certain Motor Graders {4305, 4313, 5225}
2008/03/24 A New Procedure is Available to Update Software for the Control of the Rotor on Cold Planers {7620}
2008/03/24 A Procedure is Available to Install New Software for Machine Control on Cold Planers {7620}
414E, 416E, 420E and 430E Backhoe Loaders Electronic Control Module
2008/09/08 A New Main Steering Control Valve Is Now Used on Large Wheel Loaders and Large Wheel Dozers with the Standard and Secondary Steering {4307, 4307}
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Machine Frame and Mounting
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Machine Frame and Mounting
2008/01/28 A New Clamp is Available for the Turbocharger Turbine Housing {1052, 1053}
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Gear Motor (Fan) - Demand
994F Wheel Loader Additional Messages
785D OEM Off-Highway Truck Torque Converter Oil Filter - Replace
2008/02/04 A New Parking Brake Pressure Switch is Now Used {1408, 1435, 1435}
785D OEM Off-Highway Truck Torque Converter Outlet Screen - Replace
785D Off-Highway Truck Transmission Breather - Clean
785D OEM Off-Highway Truck Transmission Magnetic Screen - Clean
Topcon® System Five Additional Messages
C7 Petroleum Engines Flywheel
Solenoid For The Centershift On Motor Graders{5479} Solenoid For The Centershift On Motor Graders{5479}
Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608, 5634, 6635} Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608, 5634, 6635}
C7 Engines for Caterpillar Built Machines Flywheel
PM-201 Cold Planer Machine Systems Control Valve (Center Auxiliary Manifold) - Disassemble
PM-201 Cold Planer Machine Systems Control Valve (Center Auxiliary Manifold) - Assemble