24M Motor Grader Machine Systems Caterpillar


Swivel - Install

Usage:

24M B93

安装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     311-1362     真空盖     1    
B     138-7575     连杆支架     1    


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01443621



    图 2g01443605

  1. 利用工具 (B) 和适当的起吊设备安装旋转接头 (11) 。 旋转接头 (11) 的重量约为 39 kg (85 lb)。

  1. 安装螺栓 (10) 。

  1. 提升托架 (9) 。 安装销 (8) 。 安装开口销 (7) 。 拆下工具 (B) 。 安装螺栓 (6) 。



    图 3g01443844

  1. 连接软管组件 (5) 。



    图 4g01443736

  1. 连接软管组件 (4) 。 连接软管组件 (3) 。



    图 5g01443566

  1. 连接软管组件 (2) 。 连接软管组件 (1) 。



    图 6g01443561

  1. 拆下工具 (A) 。

  1. 检查液压系统的油位。 关于正确的程序,请参阅操作和保养手册, "液压系统油位 - 检查"。

Caterpillar Information System:

24M Motor Grader Machine Systems Swivel - Remove
450E Backhoe Loader Features
785D OEM Off-Highway Truck Steering System Oil Filter - Replace
450E Backhoe Loader General Information
PM-201 Cold Planer Machine Systems Rotor Drive Clutch - Install
PM-201 Cold Planer Machine Systems Rotor Drive Clutch - Remove
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Gear Pump
PM-201 Cold Planer Machine Systems Drive Shaft (Rotor) - Remove and Install
PM-201 Cold Planer Machine Systems Conveyor Idler (First Stage) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Test ECM Mode
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Operator Controls
2007/12/17 Correction to Operation and Maintenance Manual , "Lifting and Tying Down the Machine" {7000, 7500}
AP600D and BG600D Asphalt Pavers Capacities (Refill)
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Piston Pump
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Pump Mounting (Hydrostatic)
2008/05/12 A New Procedure is Available to Install the New Heater Elements on Asphalt Screeds {6643, 664E}
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Control Manifold and Solenoid (Work Tool Positioner)
AP500E and BG500E Asphalt Pavers Braking System - Test
3500B Locomotive Engines Belt Tension Chart
2007/12/24 Oil Suction Tube {1302}
PM-201 Cold Planer Machine Systems Hydraulic Oil Tank (Rotor Clutch) - Remove and Install
450E Backhoe Loader Electrical Input Components
450E Backhoe Loader Location of Electrical Components
AS4251C Asphalt Paver Electric Heat System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.