Drive Shaft (Rotor) - Remove and Install
Removal Procedure
Start By:
- Remove the auxiliary pump. Refer to Disassembly and Assembly, "Auxiliary Pump - Remove".
- Disconnect hose assemblies (2) from gear pump (1) .
Show/hide table
Illustration 1 | g01427358 |
- Remove bolts (4) and guard (3) .
Show/hide table
Illustration 2 | g01427360 |
- Remove bolts (5) and caps (6) from drive shaft assembly (7) .
Show/hide table
Illustration 3 | g01443399 |
- Slide yoke assembly (8) inward toward the clutch and remove drive shaft assembly (7) .
Installation Procedure
- Install drive shaft assembly (7) and reposition yoke assembly (8) .
Show/hide table
Illustration 4 | g01443399 |
- Install caps (6) and bolts (5) .
- Install guard (3) and bolts (4) .
Show/hide table
Illustration 5 | g01427360 |
- Connect hose assemblies (2) to gear pump (1) .
Show/hide table
Illustration 6 | g01427358 |
End By: Install the auxiliary pump. Refer to Disassembly and Assembly, "Auxiliary Pump - Install".
Caterpillar Information System:
PM-201 Cold Planer Machine Systems Conveyor Idler (First Stage) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Test ECM Mode
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Operator Controls
2007/12/17 Correction to Operation and Maintenance Manual , "Lifting and Tying Down the Machine" {7000, 7500}
938H Wheel Loader and IT38H Integrated Toolcarrier Braking and Hydraulic Fan System Solenoid Valve (Cold Start, Fan Motor Shutoff)
2007/12/24 Wiring Changes For The Auxiliary Start Receptacle {1463}
Instruction for Installing the Mirror As (Adhesive Backed) on the Mirror Gp{7319} Instruction for Installing the Mirror As (Adhesive Backed) on the Mirror Gp{7319}
2008/04/21 New Software For The Brake Electronic Control Module (ECM) is Now Available {7620}
24M Motor Grader Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Install
24M Motor Grader Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Remove
PM-201 Cold Planer Machine Systems Piston Pump (Auxiliary) - Assemble
PM-201 Cold Planer Machine Systems Piston Pump (Auxiliary) - Disassemble
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Gear Pump
PM-201 Cold Planer Machine Systems Rotor Drive Clutch - Remove
PM-201 Cold Planer Machine Systems Rotor Drive Clutch - Install
450E Backhoe Loader General Information
785D OEM Off-Highway Truck Steering System Oil Filter - Replace
450E Backhoe Loader Features
24M Motor Grader Machine Systems Swivel - Remove
24M Motor Grader Machine Systems Swivel - Install
AP600D and BG600D Asphalt Pavers Capacities (Refill)
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Piston Pump
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Pump Mounting (Hydrostatic)
2008/05/12 A New Procedure is Available to Install the New Heater Elements on Asphalt Screeds {6643, 664E}