Priority Valve - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-1853     | Retaining Ring Pliers     | 1     |
- Install ball (20), spring (19), and retainer (18) into spool (12) .
Show/hide table
Illustration 1 | g01389771 |
Show/hide table
Illustration 2 | g01389720 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Use Tooling (A) in order to install retaining ring (17). Install retaining ring (17). Install slug (16) .
- Install spacers (13), spring (14), and spring (15) into spool assembly (12). Install spool assembly (12) .
- Install cover (11). Install bolts (10) .
Show/hide table
Illustration 3 | g01389719 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Install washers (6), lever assembly (7), washer (9), and cotter pin (8) .
Show/hide table
Illustration 4 | g01389714 |
- Install washer (4), lever assembly (5), washer (3), and cotter pin (2) .
Show/hide table
Illustration 5 | g01389710 |
- Install O-ring seals (1) .
Show/hide table
Illustration 6 | g01389699 |
End By: Install the priority valve. Refer to Disassembly and Assembly, "Priority Valve - Install".
Caterpillar Information System:
587R Pipelayer Power Train Priority Valve - Disassemble
2007/06/18 New Software for Articulated Trucks is Now Available {1901, 1902, 7620}
EquipmentManager Dealer Administrator Manual Product Link Installation
587R Pipelayer Power Train Priority Valve - Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 2734 - FMI 04
24M Motor Grader Power Train Electronic Control System MID 027 - CID 2734 - FMI 03
Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256} Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256}
Procedure to Rework Felling Head Frame{6319} Procedure to Rework Felling Head Frame{6319}
2007/06/25 New Bolts and Washers Are Now Used to Retain the Suspension Arms {7271}
3412E Engine for Caterpillar Built Machines Diagnostic Trouble Code List
587R Pipelayer Power Train Priority Valve - Remove
Installation of Improved Fuel Lines on Landfill Compactors{1274} Installation of Improved Fuel Lines on Landfill Compactors{1274}
R1600G Load Haul Dump Sound Information and Vibration Information
2007/07/23 Improved Power Train Software Now Used {7610, 7620}
C4.4 and C6.6 Engines for Caterpillar Built Machines System Overview
C4.4 and C6.6 Engines for Caterpillar Built Machines Glossary
AP655D Asphalt Paver Machine Systems Hydraulic Tank - Remove and Install
16M Motor Grader Power Train Service Brake (Wheel Spindle) - Remove
16M Motor Grader Power Train Service Brake (Wheel Spindle) - Install
AP655D and BG655D Asphalt Pavers Machine Systems Steering Column - Disassemble
AP655D and BG655D Asphalt Pavers Machine Systems Steering Column - Assemble
16M Motor Grader Power Train Housing (Tandem) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2007/07/09 New Software is Now Available {1901, 1902, 7620}