16M Motor Grader Power Train Caterpillar


Service Brake (Wheel Spindle) - Install

Usage:

16M B9H

安装步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     138-7574     连杆支架     2    
B     138-7576     连杆支架     1    


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01389670

  1. 使用工具 (A) 、工具 (B) 和适当的起吊设备安装车轮心轴 (3) 。 车轮心轴 (3) 的重量约为 322 kg (710 lb)。

  1. 安装螺栓 (4) 。 拧紧螺栓 (4) 至 270 ± 40 N·m (199 ± 30 lb ft) 的扭矩。



    图 2g01389668

  1. 安装管路组件 (2) 。



    图 3g01389664

  1. 安装防护罩 (1) 。

End By:

  1. 安装传动链。 请参阅 拆解和组装, "传动链条 - 安装"。
  2. 安装后轮和轮胎。 请参阅 拆解和装配, "车轮和轮胎(后)- 拆卸和安装"。

Caterpillar Information System:

16M Motor Grader Power Train Service Brake (Wheel Spindle) - Remove
AP655D Asphalt Paver Machine Systems Hydraulic Tank - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Glossary
C4.4 and C6.6 Engines for Caterpillar Built Machines System Overview
2007/07/23 Improved Power Train Software Now Used {7610, 7620}
R1600G Load Haul Dump Sound Information and Vibration Information
587R Pipelayer Power Train Priority Valve - Assemble
587R Pipelayer Power Train Priority Valve - Disassemble
2007/06/18 New Software for Articulated Trucks is Now Available {1901, 1902, 7620}
EquipmentManager Dealer Administrator Manual Product Link Installation
587R Pipelayer Power Train Priority Valve - Install
24M Motor Grader Power Train Electronic Control System MID 027 - CID 2734 - FMI 04
AP655D and BG655D Asphalt Pavers Machine Systems Steering Column - Disassemble
AP655D and BG655D Asphalt Pavers Machine Systems Steering Column - Assemble
16M Motor Grader Power Train Housing (Tandem) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2007/07/09 New Software is Now Available {1901, 1902, 7620}
16M Motor Grader Power Train Rear Axle, Differential and Final Drive - Remove
16M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Wiring Information
AS3251C Asphalt Screed Electronic Control Module (Screed)
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332} Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
AS3251C Asphalt Screed Operator Controls
2007/06/25 Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.