Steering Column - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9S-3263 | Thread Lock Compound | 1 |
- Install O-ring seal (18) on position sensor (1).
Show/hide table
Illustration 2 g01401484 - Install mounting block assembly (17) to plate (15) and install bolts (16).
Show/hide table
Illustration 3 g01401483 - Install shaft (14) and roll pin (13).
Show/hide table
Illustration 4 g01401482 - Install spacer (9), spring (10), and snap ring (11).
- Install woodruff key (12).
Show/hide table
Illustration 5 g01401481 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Install torque arm (7) and tighten set screws (8).
Show/hide table
Illustration 6 g01401480 - Install roll pin (6).
Show/hide table
Illustration 7 g01401479 - Install plate (5), tubes (3), and bolts (3).
Show/hide table
Illustration 8 g01401478 - Apply Tooling (A) to bolts (2). Install position sensor (1) and bolts (2). Tighten bolts (2) to a torque of
1.0 ± .25 N·m (9 ± 2 lb in) .
Show/hide table
Illustration 1 | g01401485 |
End By:
- Install the steering column. Refer to Disassembly and Assembly, "Steering Column - Install".
Caterpillar Information System:
AP655D and BG655D Asphalt Pavers Machine Systems Steering Column - Disassemble
16M Motor Grader Power Train Service Brake (Wheel Spindle) - Install
16M Motor Grader Power Train Service Brake (Wheel Spindle) - Remove
AP655D Asphalt Paver Machine Systems Hydraulic Tank - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Glossary
C4.4 and C6.6 Engines for Caterpillar Built Machines System Overview
2007/07/23 Improved Power Train Software Now Used {7610, 7620}
R1600G Load Haul Dump Sound Information and Vibration Information
587R Pipelayer Power Train Priority Valve - Assemble
587R Pipelayer Power Train Priority Valve - Disassemble
2007/06/18 New Software for Articulated Trucks is Now Available {1901, 1902, 7620}
EquipmentManager Dealer Administrator Manual Product Link Installation
16M Motor Grader Power Train Housing (Tandem) - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2007/07/09 New Software is Now Available {1901, 1902, 7620}
16M Motor Grader Power Train Rear Axle, Differential and Final Drive - Remove
16M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Wiring Information
AS3251C Asphalt Screed Electronic Control Module (Screed)
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332} Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
AS3251C Asphalt Screed Operator Controls
2007/06/25 Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
16M Motor Grader Power Train Transmission Oil Filter Base - Remove
16M Motor Grader Power Train Transmission Oil Filter Base - Install