2007/06/25 Caterpillar


New Bolts and Washers Are Now Used to Retain the Suspension Arms {7271}

Usage:

735 AWR
Articulated Truck:
735 (S/N: B1N1-UP; AWR1-UP)
740 (S/N: AXM1-UP; B1P1-UP)
740 EJECTOR (S/N: B1R1-UP; AZZ1-UP)
Service Magazine SEPD0894, 25 June 2007, "New Bolts and Washers Are Now Used to Retain the Suspension Arms". The information in this article has changed. Disregard this article. The correct information follows.

ReferenceService Magazine, SEPD0764, 20 December 2004, "New Hardware Is Available for the Chains for the Tailgate Scissors"

Description of Change: New bolts and washers are now used in order to retain the suspension arms on the Articulated Trucks that are listed. The new bolts and washers reduce the stress on the bolted joint in order to prevent the bolts from loosening.

Adaptable To: The new parts that are listed in Tables 1 and 2 replace the former parts that are listed in the Tables. The parts in Table 1 are part of the suspension group on machines that were not equipped with a scissors tailgate. The parts in Table 2 are part of the suspension group on machines that were equipped with a scissors tailgate. Refer to Illustrations 1 and 2 for the location of the new parts.

Table 1
Parts List for Machines without a Scissors Tailgate    
Item     Qty     New Pt. No.     Description     Former Pt. No.    
1     2     305-8907     Washers     143-3911    
2     6     8T-0667     Bolts     8T-0666    
3     6     198-4771     Hard Washers     6V-8237    

Table 2
Parts List for Machines with a Scissors Tailgate    
Item     Qty     New Pt. No.     Description     Former Pt. No.    
4     2     305-3593     Plate     219-6336    
5     6     6V-8132     Bolts     8T-0668    
6     6     198-4771     Hard Washers     6V-8237    
7     2     6V-7676 (1)     Nuts     6V-7676    
( 1 ) The part number for this part has not changed, but new parts should be used.



Illustration 1g01389542

Machines with no scissors tailgate




Illustration 2g01390116

Machines with a scissors tailgate

This change is effective with the following machines.

  • 735 (S/N: B1N887-UP)

  • 740 (S/N: B1P2425-UP)

  • 740 EJECTOR (S/N: B1R329-UP)

The change to the machines without a scissors tailgate is adaptable to the machines that are listed at the beginning of this article.

The change to the machines with a scissors tailgate is adaptable to 735 (S/N: AWR537-UP; B1N1-UP) and 740 (S/N: AXM1032-UP; B1P1-UP).

Caterpillar Information System:

3412E Engine for Caterpillar Built Machines Diagnostic Trouble Code List
587R Pipelayer Power Train Priority Valve - Remove
Installation of Improved Fuel Lines on Landfill Compactors{1274} Installation of Improved Fuel Lines on Landfill Compactors{1274}
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Output Transfer Gears
2007/07/23 Version 90 Software is Now Used on Reclaimer Mixers {7610, 7620}
587R Pipelayer Power Train Steering Clutch and Brake Control Valve - Install
12H, 140H and 160H Motor Graders Air System and Brakes Centershift Lock Pin
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Piston Pump Margin Pressure - Test
EquipmentManager Dealer Administrator Manual Manage Users
587R Pipelayer Power Train Steering Clutch and Brake Control Valve - Remove
24M Motor Grader Power Train Final Drive
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Fuel System Priming Pump - Operate
Procedure to Rework Felling Head Frame{6319} Procedure to Rework Felling Head Frame{6319}
Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256} Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256}
24M Motor Grader Power Train Electronic Control System MID 027 - CID 2734 - FMI 03
24M Motor Grader Power Train Electronic Control System MID 027 - CID 2734 - FMI 04
587R Pipelayer Power Train Priority Valve - Install
EquipmentManager Dealer Administrator Manual Product Link Installation
2007/06/18 New Software for Articulated Trucks is Now Available {1901, 1902, 7620}
587R Pipelayer Power Train Priority Valve - Disassemble
587R Pipelayer Power Train Priority Valve - Assemble
R1600G Load Haul Dump Sound Information and Vibration Information
2007/07/23 Improved Power Train Software Now Used {7610, 7620}
C4.4 and C6.6 Engines for Caterpillar Built Machines System Overview
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.