Steering Clutch and Brake Control Valve - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
Start By:
- Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove plate assembly (1).
Show/hide table
Illustration 1 | g01389315 |
- Remove plate assembly (2) .
Show/hide table
Illustration 2 | g01389318 |
- Disconnect rods (3) and (4). Position rods (3) and (4 ) out of the way.
Show/hide table
Illustration 3 | g01389319 |
- Remove bolt (5) .
Show/hide table
Illustration 4 | g01389320 |
- Attach Tooling (A) and a suitable lifting device onto valve (7). Remove bolts (6). Remove steering clutch and brake control valve (7). The weight of steering clutch and brake control valve (7) is approximately 43 kg (95 lb).
Show/hide table
Illustration 5 | g01389321 |
Caterpillar Information System:
24M Motor Grader Power Train Final Drive
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Fuel System Priming Pump - Operate
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Fuel System Primary Filter (Water Separator) Element - Replace
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Fuel System Primary Filter (Water Separator) - Drain
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader Engine Oil and Filter - Change
770 and 772 Off-Highway Truck Hydraulic and Braking System Brake System Air - Purge
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Oil Cooler
Inspection and Salvage of Rear Wheel Spindles for All Off-Highway Trucks {4201, 4205} Inspection and Salvage of Rear Wheel Spindles for All Off-Highway Trucks {4201, 4205}
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Engine Oil Level - Check
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Cooling System Water Temperature Regulator - Replace
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader Cooling System Level - Check
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader Cooling System Coolant Extender (ELC) - Add
EquipmentManager Dealer Administrator Manual Manage Users
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Piston Pump Margin Pressure - Test
12H, 140H and 160H Motor Graders Air System and Brakes Centershift Lock Pin
587R Pipelayer Power Train Steering Clutch and Brake Control Valve - Install
2007/07/23 Version 90 Software is Now Used on Reclaimer Mixers {7610, 7620}
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Output Transfer Gears
Installation of Improved Fuel Lines on Landfill Compactors{1274} Installation of Improved Fuel Lines on Landfill Compactors{1274}
587R Pipelayer Power Train Priority Valve - Remove
3412E Engine for Caterpillar Built Machines Diagnostic Trouble Code List
2007/06/25 New Bolts and Washers Are Now Used to Retain the Suspension Arms {7271}
Procedure to Rework Felling Head Frame{6319} Procedure to Rework Felling Head Frame{6319}
Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256} Installation of Improved Walkways on 793C and 793C XQ Off-Highway Trucks{7254, 7255, 7256}