Lifting Gp - Remove and Install
Removal Procedure
- Attach a suitable lifting device to lifting group (1). Remove bolts (2) and lifting group (1). The weight of lifting group (1) is approximately 25 kg (56 lb).
Show/hide table
 | |
| Illustration 1 | g01385470 |
Installation Procedure
- Attach a suitable lifting device to lifting group (1). Install lifting group (1). The weight of lifting group (1) is approximately 25 kg (56 lb). Install bolts (2). Tighten bolts (2) to a torque of 100 ± 20 N·m (74 ± 15 lb ft).
Show/hide table
| | |
| Illustration 2 | g01385470 |
Caterpillar Information System:
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
120M and 12M Motor Graders Braking and Hydraulic Fan System Control Manifold (Brake, Hydraulic Fan)
770 and 772 Off-Highway Trucks Engine Supplement Radiator Core - Install
770 and 772 Off-Highway Trucks Engine Supplement Radiator Core - Remove
120M and 12M Motor Graders Braking and Hydraulic Fan System Brake Accumulator Charging Valve - Check
140M Motor Grader Engine Supplement Flywheel Housing - Remove and Install
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan) Margin Pressure - Test and Adjust
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan) High Pressure Stall - Test and Adjust
938H Wheel Loader and IT38H Integrated Toolcarrier Braking and Hydraulic Fan System Service Brakes
CB14 Paving Compactor Machine Systems Direction and Speed Control - Install
CB14 Paving Compactor Machine Systems Direction and Speed Control - Remove
587R Pipelayer Machine Systems Gear Pump (Counterweight) - Assemble
AS3251C Asphalt Screed Operator Platform
2007/07/09 Use of Dry Lubricant is Recommended {0645, 7301}
120M and 12M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan)
2007/06/18 An Updated Procedure for Starting the Engine of a Skid Steer Loader or Multi Terrain Loader is Available {1000, 7000}
14L Motor Grader Drive Shaft - Remove and Install
CB14 Paving Compactor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
160M Motor Grader Power Train Transmission - Remove
AS3301C Asphalt Screed End Gate
CS54 and CP54 Vibratory Soil Compactors Cooling System Coolant (ELC) - Change
CB14 Paving Compactor Machine Systems Diaphragm Pump (Water Spray) - Remove and Install
WAVS Installation Guide for Generic Applications{7347, 7348} WAVS Installation Guide for Generic Applications{7347, 7348}
AccuGrade® Compaction GPS Mapping and Measurement System Controller - MC024 and Alpha30